HS-3000 datasheet(43/46 Pages) BOSER

43 / 46 page

person from changing any part of your system configuration.

Additionally, when a password is enabled, you can also require the

BIOS to request a password every time your system is rebooted. This

would prevent unauthorized use of your computer.

You determine when the password is required within the BIOS

Features Setup Menu and its Security option (see Section 3). If the

Security option is set to “System”, the password will be required both at

boot and at entry to Setup. If set to “Setup”, prompting only occurs

when trying to enter Setup.

4.11 Auto Configuration with Optimal

Settings

When you press <Enter> on this item you will get a confirmation dialog

box with a message shown below. This option allows you to

load/restore the BIOS default values permanently stored in the BIOS

ROM. Pressing ‘Y’ loads the BIOS default values for the most stable,

minimal-performance system operations.

AMIBIOS SETUP – PERIPHERAL SETUP

Standard CMOS Setup

Advanced CMOS Setup

Advanced Chipset Setup

Power Management Setup

Load high performance settings (Y/N) ? N

Change Supervisor Password

Auto Configuration with Optimal Settings

Auto Configuration with Fail Safe Settings

Save Settings and Exit

Exit Without Saving

Standard CMOS setup for changing time, date, hard disk type, etc.

ESC:Exit

:Sel F2/F3: Color F10: Save & Exit

HS-3000 датащи(PDF) 43 Page - BOSER Technology Co., Ltd