Product # MQME-270-P

Phone 1-888-567-9596

www.synqor.com

Doc.# 005-2ME027P Rev. 2

03/16/09

Page 5

MQME-270-P

Technical Specification

-180

-160

-140

-120

-100

-80

-60

-40

-20

0

20

0.01

0.1

1

10

100

1000

10000

100000

Frequency (kHz)

Common Mode

Differential Mode

0.01

0.1

1

10

100

0.01

0.1

1

10

100

1000

Frequency (kHz)

Figure 2: Typical Output Impedance (magnitude) of the filter looking

back into its output pins with the input pins connected to a source with

zero source impedance.

Figure 1: Typical Common Mode and Differential Mode Attenuation

provided by the filter as a function of frequency. Both input lines are

connected to chassis ground through 50ohm resistors. The filter case is

also connected to chassis ground.

Figure 3: MIL-STD-461E Method CE101 Low Frequency Conducted

Emissions. Limit line (in red) is the ‘Submarine Applications DC Curve’.

Figure 4: MIL-STD-461E Method CE102 High Frequency Conducted

Emissions. Limit line (in red) is the ‘Basic Curve’.

Figure 5: MIL-STD-461E Method RE101 Low Frequency Radiated

Emissions. Limit line (in red) is the ‘Standard Curve’ from MIL-STD-

461C Method RE01, which is more strict than all RE101 limits.

Figure 6: MIL-STD-461E Method RE102 High Frequency Radiated

Emissions. Limit line (in red) is the ‘Submarine External to Pressure

Hull Curve’.