5

21737-0931, Rev. A

04-05-2006

TRXNFEMM

Package Outline

Ordering Information

Dimensions in inches [mm]

Default tolerances:

.xxx = + .005”, .xx = + .01”

Optical Communication Products, Inc. reserves the right to make changes in equipment design or specifications without notice. Information supplied by Optical Communication

Products, Inc. is believed to be accurate and reliable. However, no responsibility is assumed by Optical Communication Products, Inc. for its use nor for any infringements of

third parties, which may result from its use. No license is granted by implication or otherwise under any patent right of Optical Communication Products, Inc.

Optical Communication Products, Inc.

6101 Variel Avenue, Woodland Hills, CA 91367, Tel.: 818-251-7100, FAX: 818-251-7111, www.ocp-inc.com

and MOD_DEF(0) is TTL LOW. When the host system

detects this condition, it activates the serial protocol

clock signal (SCL). The negative edge clocks data from the

SFP EEPROM.

The serial data signal (SDA) is for serial data transfer. The

host uses SDA in conjunction with SCL to mark the start

and end of serial protocol activation.

The data transfer protocol and the details of the mandatory

and vendor specific data structures are defined in the SFP MSA.

Power supply and grounding: The power supply line should

be well-filtered. All 0.1

µF power supply bypass capacitors

should be as close to the transceiver module as possible.

Application Notes (Cont.)

.0

1.02

.4

8.89

.1

1.78

1.86

47.35

.335

8.51

.54

.53

13.67

13.54

2.2 REF

56.6

1.646 .006

41.80 0.15

1.771 .008

44.98 0.20

.246 .002

6.25 0.05

.546 .008

13.87 0.20

Model Name

Operating Case Temperature

Latch Color

Nominal

Wavelength

TRXNFEMM4BSS

- 5°C to +70°C

Silver

1310nm

TRXNFEMM4ESS

- 5°C to +85°C

Silver

1310nm

TRXNFEMM4ASS

- 40°C to +85°C

Silver

1310nm