NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com

07-07

Ultra-Miniature Slides

Series SS

General Specifications

Electrical Capacity (Resistive Load)

Power Level:

0.1A @ 30V DC

Other Ratings

Contact Resistance:

20 milliohms maximum

Insulation Resistance:

100 megohms minimum @ 500V DC

Dielectric Strength:

500V AC minimum 1 minute minimum

Mechanical Life:

10,000 operations minimum

Electrical Life:

10,000 operations minimum

Contact Timing:

Shorting (make-before-break)

Total Travel:

.079” (2.0mm)

Materials & Finishes

Actuator:

Polyacetal

Upper Case:

Polyacetal

Lower Case:

Glass fiber reinforced polyester

Movable Contactor:

Phosphor bronze with silver plating

Interior Base:

Phenolic resin (thermoset)

Terminals:

Brass with silver plating over copper plating

Environmental Data

Operating Temp Range:

–15°C through +60°C (+5°F through +140°F)

Humidity:

90 ~ 95% humidity for 96 hours @ 40°C (104°F)

Vibration:

10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range

& returning in 1 minute; 3 right angled directions for 2 hours

Shock:

PCB Processing

Soldering:

Wave Soldering: See Profile B in Supplement section.

Manual Soldering: See Profile B in Supplement section.

Cleaning:

These devices are not process sealed. Hand clean locally using alcohol based solution.

Standards & Certifications

UL Recognition or

CSA Certification:

The SS series devices have not been tested for UL recognition and CSA certification.

These switches are designed for se in a low-voltage, low-current circuit.

When used as intended in a low-voltage, low-current circuit, the results do not produce

hazardous energy.