NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com

03-07

Miniature Slides for High Frequency

Series FS

General Specifications

Distinctive Characteristics

For high frequency (DC through 1GHz): Isolation 40dB minimum at 1GHz.

Insertion loss 0.5dB maximum at 1GHz.

Impedance 75 ohms

Innovative alternative to relay products

Highly reliable, self-cleaning twin contact mechanism with gold plating

Long total travel of .138” (3.5mm) for highly visible actuator position

Distinct audible and tactile feedback during actuation

Suited to high frequency applications (90MHz to 1GHz) such as CATV and

communication equipment

Actual Size

with Tall Actuator

Electrical Capacity (Resistive Load)

Logic Level:

0.4VA maximum @ 28V AC/DC maximum

(Applicable Range 0.1mA ~ 0.1A @ 20mV ~ 28V)

Note: Find additional explanation of operating range in Supplement section.

RF Ratings

Impedance:

75 ohms

Insertion Loss:

0.5dB maximum @ 1GHz

Isolation:

40dB minimum @ 1GHz

Other Ratings

Contact Resistance:

200 milliohms maximum

Insulation Resistance:

250 megohms minimum @ 500V DC

Dielectric Strength:

500V AC minimum for 1 minute minimum

Mechanical Life:

1,000 operations minimum

Electrical Life:

1,000 operations minimum

Contact Timing:

Nonshorting (break-before-make)

Total Travel:

.138” (3.5mm)

Environmental Data

Operating Temp Range:

–30°C through +85°C (–22°F through +185°F)

Humidity:

90 ~ 95% humidity for 240 hours @ 40°C (104°F)

Vibration:

10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range

& returning in 5 minutes; 3 right angled directions for 2 hours

Shock:

Installation

Soldering Time & Temp:

Wave Soldering: See Profile A in Supplement section.

Manual Soldering: See Profile A in Supplement section.

Cleaning:

These devices are not process sealed. Hand clean locally using alcohol based solution.