Light Duty Miniature Toggles

Series E

2-06

NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com

General Specifications

Electrical Capacity (Resistive Load)

Power Level (No Code or P):

3A @ 125V AC for silver contacts

Logic Level (code G or PG):

0.4VA maximum @ 28V AC/DC maximum for gold contacts

(Applicable Range 0.1mA ~ 0.1A @ 20mV ~ 28V)

Note: Find additional explanation of operating range in Supplement section.

Other Ratings

Contact Resistance:

10 milliohms maximum for silver;

20 milliohms maximum for gold

Insulation Resistance:

1,000 megohms minimum @ 500V DC

Dielectric Strength:

1,000V AC minimum between contacts for 1 minute minimum;

1,500V AC minimum between contacts & case for 1 minute minimum

Mechanical Life:

100,000 operations minimum

Electrical Life:

20,000 operations minimum for silver;

50,000 operations minimum for gold

Angle of Throw:

25°

Materials & Finishes

Toggle:

Brass with chrome plating

Bushing:

Brass with nickel plating

Frame:

Stainless steel

Case:

Melamine phenolic resin (UL94V-0)

Movable Contacts:

Copper with silver or gold plating

Stationary Contacts:

Silver with silver or gold plating

Terminals:

Copper with silver or gold plating

Environmental Data

Operating Temp Range:

–10°C through +70°C (+14°F through +158°F)

Humidity:

90 ~ 95% humidity for 96 hours @ 40°C (104°F)

Vibration:

10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range

& returning in 1 minute; 3 right angled directions for 2 hours

Shock:

Installation

Mounting Torque:

Soldering Time & Temp:

Circuits 2 & 5 Manual Soldering: 3 seconds maximum @ 350°C maximum

Wave Solder: 5 seconds maximum @ 270°C maximum.

Circuits 1, 3, 8, & 9 Manual Soldering: 4 seconds maximum @ 410°C maximum

Wave Solder: See Profile A in Supplement section.

Note: On circuits 1, 3, 8, & 9 levers must be in center or off position while soldering.

Standards & Certifications

Flammability Standards:

UL94V-0 case

UL Recognized:

All single & double pole models recognized at 3A @ 125V AC;

UL File No. WOYR2.E44145;

add “/U” to end of part number to order UL mark on switch.

CSA Certified:

Single pole, double throw solder lug & PC models certified at 3A @ 125V AC;

double pole, double throw PC models certified at 3A @ 125V AC;

CSA File No. 023535-0-000;

add “/C” to end of part number to order CSA mark on switch.