P3913

ETALDOC 774/4

Page 4 of 4

January 2004

CERTIFICATION

COPYRIGHT

Certified by BSI to IEC 950:1991/A4:1996 (IEC CB

Test Certificate No. GB518W) sub-clauses 1.5,

1.5.1, 1.5.3, 2.2, 2.2.2, 2.2.3, 2.2.4, 2.9.2, 2.9.3,

2.9.4, 4.4, 4.4.3.2 (class V-0) and 5.3 for a

maximum working voltage of 250Vrms, nominal

mains supply voltage not exceeding 300Vrms and

a maximum operating temperature of +85ºC in

Pollution Degree 2 environments, supplementary

insulation,

clearance

greater

than

2.0mm,

creepage greater than 2.5mm, distance through

solid insulation greater than 0.4mm.

Recognized under the Component Recognition

Program of Underwriters Laboratories Inc. to US and

Canadian requirements requirements CAN/CSA C22.2

No. 60950-1-03/UL60950-1, First Edition, based on

IEC 60950-1, First Edition, maximum working voltage

250Vrms,

Pollution

Degree

2,

supplementary

insulation.

UL File number E203175

Additionally, Profec Technologies certifies all

transformers as providing voltage isolation of

2.12kVrms, 3kV DC minimum.

All shipments are

supported by a Certificate of Conformity to current

applicable safety standards.

ETAL and P3913 are Trade Marks of Profec

Technologies Ltd.

The Trade Mark ETAL is registered at the UK

Trade Marks Registry.

Profec Technologies Ltd. is the owner of the

design right under the Copyright Designs and

Patents Act 1988 and no rights or licences are

hereby granted or implied to any third party.

© 2000 – 2004 Profec Technologies Ltd.

Reproduction prohibited.

ETAL Group Oy, Kuormatie 14, FIN-03101, Nummela

Telephone: +358 (0)20 7500 330

Fax: +358 (0)20 7500 333

Website: www.etalgroup.com

Email: etalgroup@egruppen.com

FM 25326

ISO 9001

E203175