General Specifications

Dimensions

6.8˝diameter

Mounting

IndoorOperatingTemperature

32°to120°F(0°to49°C)

Weight

5.3oz.(150grams)

SpectrAlert Mounting Diagrams

Strobe or Horn/Strobe with Mounting Plate

Strobe or Horn/Strobe with Accessory Back Box Skirt

Engineering Specifications

Strobe

Strobe shall be a System Sensor SpectrAlert Model _________ listed to UL 1971 and be approved for fire protective ser-

vice where ceiling mount strobes are permitted. The strobe shall be wired as a primary signaling notification appliance

and shall flash at 1Hz over the strobe’s entire operating range. The strobe light shall consist of a xenon flash tube and

associated lens/reflector system.

Horn/Strobe Combination

Horn/strobe shall be a System Sensor SpectrAlert Model _________ listed to UL 1971 and UL 464 and be approved

for fire protective service where ceiling mount horn/strobes are permitted. The horn/strobe shall be wired as a primary

signaling notification appliance and shall flash at 1Hz over its entire operating range. The strobe light shall consist of a

xenon flash tube and associated lens/reflector system. The horn shall have two tone options, two audibility options, and

the option to switch between a temporal and a non-temporal continuous pattern. These options shall be selected by a

multi-position switch. Strobes shall be powered independently of the sounder with the removal of factory installed jump-

er wires. The horn on horn/strobe models shall operate on a coded or non-coded power supply.

Note: The strobes must be powered continuously for the horn to operate.

BBSCW