Agency Listings

Indoor Selectable

Output Speaker Strobes

and Dual Voltage

Evacuation Speakers

speaker strobes and dual evacuation speakers can

reduce ground faults and allow faster installation.

Features

Plug-in design

•

Protective cover isolates speaker components, reduces ground

•

faults

Electrical compatibility with existing SpectrAlert products

•

Field selectable candela settings on wall and ceiling units:

•

Standard: 15, 15/75, 30, 75, 95, 110, 115

High: 135, 150, 177, 185

Shorting spring on mounting plate tests continuity before

•

installation

Rotary switch simplifies field selection of speaker voltage (25 and

•

70.7 Vrms) and power settings (¼, ½, 1 and 2 watts)

Universal mounting plate for wall- and ceiling-mount units

•

Compatible with System Sensor synchronization protocol

•

SP speakers offer high fidelity sound output

•

SPV speakers offer high volume sound output

•

Automatic selection of 12- or 24-volt operation at 15 and 15/75

•

candela

No extension ring required

•

Ceiling and wall mount application

•

Optional tamper resistant Torx head screw included

•

The SpectrAlert Advance Series of speakers and speaker strobes

is designed to reduce ground faults. The plug-in design allows the

installer to pre-wire mounting plates and dress the wires before

plugging in the speakers. The plastic cover prevents nicked wires by

covering exposed speaker components.

This design also allows faster installations with instant feedback to

ensure that wiring is properly connected, rotary switches to select

voltage and power settings, and 11 field selectable candela settings

for wall and ceiling speaker strobes.

The low total harmonic distortion of the SP speaker offers high

fidelity sound output while the SPV speaker offers high volume

sound output for use in high ambient noise applications.

SpectrAlert Advance makes installation easy

•Attachauniversalmountingplatetoa4×4×21⁄8inchbackbox.

Flush mount applications are achievable without the need for an

extension ring.

•Connectthenotificationappliancecircuitorspeakerwiringtothe

terminals on the mounting plate.

•Attachthespeakerorspeakerstrobetothemountingplateby

inserting the product tabs into the mounting plate grooves. Rotate

the device into position to lock the product pins into the mounting

plate terminals. The device will temporarily hold in place with a

catch until it is secured with a captured mounting screw.

10-08-E

7320-1653:201

S4048