A05-0425-002

Architectural/Engineering Specifications

General

SpectrAlert Advance outdoor speaker and speaker strobes shall mount to a weatherproof back box. A universal mounting plate shall be used for mounting

ceiling and wall products. The notification appliance circuit and amplifier wiring shall terminate at the universal mounting plate. Also, SpectrAlert Advance

onanominal12or24volts.WhenusedwiththeSync•CircuitModule,12-voltratednotificationappliancecircuitoutputsshalloperatebetween9and17.5volts;

24-volt rated notification appliance circuit outputs shall operate between 17 and 33 volts. Outdoor SpectrAlert Advance products shall operate between –40°F

and 151°F from a regulated DC, or full-wave rectified, unfiltered power supply.

Speaker

Speaker shall be a System Sensor SpectrAlert Advance Model ______ dual voltage transformer speaker capable of operating at 25.0 or 70.7 nominal Vrms.

Speaker shall be listed to Underwriter’s Laboratories Standard S4048 for outdoor fire protective signaling systems. Speaker shall have a frequency range of 400

to 4000 Hz and shall have an operating temperature from –40°F to 150.8°F. Speaker shall have power taps and wattage settings which are selected by rotary

switches. The speaker must be installed with its weatherproof backbox in order to remain outdoor approved per UL listing S4048. The speaker shall be suitable

for use in air handling spaces, as well as wet environments.

Speaker Strobe combination

The Speaker Strobe shall be a System Sensor Model _____ listed to UL 1638 and UL 1480 and be approved for fire protective signaling systems. Speaker shall

be capable of operating at 25.0 or 70.7 nominal Vrms, and shall have a frequency range of 400 to 4000 Hz. Speaker shall have power taps that are selected

by rotary switch. The strobe shall consist of a xenon flash tube with associated lens/reflector system and operate on either 12V or 24V. The strobe shall also

feature selectable candela output, providing options for 15 or 15/75 candela when operating on 12V and 15, 15/75, 30, 75, 110, 115, 135, 150, 177 or 185 when

operating on 24V. The strobe shall comply with the Americans with Disabilities Act requirement for visible signaling appliances, flashing at 1 Hz over the strobe’s

entire operating voltage range. The speaker strobe must be installed with its weatherproof back box in order to remain outdoor approved per UL. The speaker

strobe shall be suitable for use in wet environments.

Physical Specifications

Operating Temperature

–40°F to 151°F (–40°C to 66°C)

Dimensions, Wall-Mount

SPS Speaker Strobe

6.0 in L × 5.0 in W × 4.7 in D (including lens and speaker)

SP Speaker

6.0inL×5.0inW×2.9inD

Dimensions, Ceiling-Mount

SPS Speaker Strobe

6.8 in Dia. × 4.7 in D (including lens and speaker)

SP Speaker

6.8inDia.×2.9inD

Dimensions, Wall-Mount Weatherproof Back Box

6.5inL×5.5inH×2.9inD

Dimensions, Ceiling-Mount Weatherproof Back Box

7.2inDia.×2.9inD

Electrical/Operating Specifications

Nominal Voltage (speakers)

25 Volts or 70.7 Volts (nominal)

Maximum Supervisory Voltage (speakers)

50 VDC

Strobe Flash Rate

1 flash per second

Nominal Voltage (strobes)

Regulated 12 VDC/FWR or regulated 24 DC/FWR

Operating Voltage Range (includes fire alarm panels

with built in sync)

8 to 17.5 V (12 V nominal) or 16 to 33 V (24 V nominal)

Operating Voltage with MDL Sync Module

9to17.5V(12Vnominal)or17to33V(24Vnominal)

Frequency Range

400 to 4000 Hz

Power

¼, ½, 1, 2 watts