Tolerence:

±.015 (±.38)

Recommended Land & Hole Pattern

1.575 (40.01)

0.197 (5.00)

0.394 (10.01)

ø0.063 (ø1.60)

1.200 (30.48)

0.161 (4.09)

0.125 (3.18)

1.812 (46.02)

0.130 (3.30)

0.047 (1.18)

1.812 (46.02)

1.575 (40.01)

1.885 (47.88)

0.070 (1.78) MAX

1.812 (46.03)

0.335 (8.51) MAX

0.010 (0.25) MIN

1.905 (48.39)

1.390 (35.31)

1.150 (29.21)

leadframe length

overall length

BOTTOM VIEW

SIDE VIEW

TOP VIEW

ø.050 (ø1.27)

Non-Skid Retaining Pins,

2 Places

1

0.477 (12.11)

0.502 (12.75)

0.053 (1.36)

All Dimensions in Inches [mm]

0.069 (1.74)

0.197 (5.00)

0.394 (10.01)

1.181 (30.00)

1.378 (35.00)

0.100 (2.54)

12 places

0.063 (1.60)

0.053 (1.36)

1.181 (30.00)

1.378 (35.00)

Datasheet © Artesyn Technologies® 2005

The information and specifications contained in this datasheet are believed to be correct at time of publication. However, Artesyn Technologies accepts no responsibility for consequences arising

from printing errors or inaccuracies. The information and specifications contained or described herein are subject to change in any manner at any time without notice. No rights under any patent

accompany the sale of any such product(s) or information contained herein.

For the most current data and application support visit www.artesyn.com/powergroup/products.htm

N

No

otte

es

s

1

Measured as per recommended set-up. See Application Note 116 for details.

2

di/dt = 0.1 A/µs, Vin = 48 Vdc, Tc = 25 °C, load change = 0.5 lo max. to

0.75 lo max. and 0.75 lo max. to 0.5 lo max.

3

The SXE15 meets level A and level B conducted emissions only with

external components connected before the input pins to the converter.

See Application Note 116 for details.

4

Recommended input fusing is a 2 A HRC 200 V rated fuse.

5

This product is only for inclusion by professional installers within other

equipment and must not be operated as a stand alone product.

6

Measured with external Pi filter. See Application Note 116 for further details.

7

Start-up into resistive load.

8

Active low remote on/off is available. Standard product is active high.

Designate with the Suffix ‘-R’ e.g. SXE15-48S05-RJ.

9

Operating ambient temperatures are specified at natural convection.

Higher operating temperatures are possible with increased airflow.

See Application Note 116 for further details.

over all operating conditions for the SXE15-48S12J.

temperature and initial settings.

TSE RoHS 5/6 (non Pb-free) compliant versions may be available on

special request, please contact your local sales representative for details.

local Artesyn representative or use the on-line model number search tool at

http://www.artesyn.com/powergroup/products.htm to find a suitable

alternative.

CAUTION: Hazardous internal voltages and high temperatures.

Ensure that unit is not user accessible.

PROTECTION

Short circuit

Continuous

Overvoltage

Latching clamp

TELECOM SPECIFICATION

Central office interface A

ETS300-132-2, input voltage

and current requirements

PIN CONNECTIONS

PIN NUMBER

FEATURE

1

Vout +

2

Vout -

3

N/C

4

Trim

5

N/C

6

N/C

7

N/C

8

On/Off

9

N/C

10

N/C

11

Vin -

12

Vin +

SXE15 Series

Single output

DC-DC CONVERTERS 10.8-15 W High Efficiency DC-DC Converters

2

Please consult our website for the following items:

www.artesyn.com

International Safety Standard Approvals

UL/cUL 1950 3rd edition. File No. E135734

TÜV

TÜV Rheinland. File No. 10401-3336-35841. Licence No. 40004290

OUTPUT

INPUT

OVP

OUTPUT

OUTPUT

OUTPUT

EFFICIENCY

REGULATION

MODEL

POWER

VOLTAGE

VOLTAGE

CURRENT

CURRENT

(TYP.)

LINE

LOAD

NUMBER

(8,14,15)

(MAX.)

(MIN.)

(MAX.)

10.8 W

33-75 Vdc

2.3 Vdc

1.8 V

0 A

6 A

83%

0.3%

2.0%

SXE15-48S1V8J

15 W

33-75 Vdc

3.2 Vdc

2.5 V

0 A

6 A

85%

0.3%

1.5%

SXE15-48S2V5J

15 W

33-75 Vdc

4 Vdc

3.3 V

0 A

4.5 A

86%

0.1%

0.5%

SXE15-48S3V3J

15 W

33-75 Vdc

6 Vdc

5 V

0 A

3 A

87%

0.1%

0.5%

SXE15-48S05J

15 W

33-75 Vdc

12 V

0 A

1.25 A

85%

0.1%

0.5%

SXE15-48S12J

File Name: sxe15s.pdf Rev (02): 08 Dec 2005