FLI8548H

Feature attributes

3/7

2

Feature attributes

●

Flexible digital and analog capture

–

16 configurable analog inputs

–

Direct connection from tuner or connector to analog input pin

–

Integrated anti-aliasing filter

–

RGB capture up to 135 MHz and YUV capture up to 150 MHz

–

Full SCART support including RGB fast blank

–

4:4:4/4:2:2/CCIR656/601 8/16/24-bit digital input port

–

Simple connection to JPEG and MPEG processors with a 8-bit bi-directional

media port

–

Supports triple 10-bit ADCs for better SNR

–

HDMI input port supports up to 1080p digital video input

–

Integrated DVI 1.0 input supported

●

Integrated 3D video decoder and 10-bit ADC

–

Faroudja IntelliComb™ technology

–

3D adaptive comb filter for luma–chroma separation

–

Supports Composite, S-Video, and Component (including High Definition) video

input signals

–

Supports all broadcast TV video standards—NTSC (North America and Japan),

PAL (I, B, G, H, M, D, N), SECAM (D, K, L, B, G)

–

Macrovision® and VCR trick mode support

●

VBI signal processing

–

Multi-standard digital VBI dataslicer

–

WST Teletext FastText page support access > 2048 page cache

–

Supports WST level 2.5 and freeze frame

–

V-chip, VPS, Closed Captioning, XDS, CGMS, and WSS decode

●

Faroudja DCDI Cinema format conversion

–

Low angle de-interlacing processing

–

Per pixel Motion Adaptive De-interlacing (MADi) up to 1080i format

–

Format conversion up to WUXGA resolutions

–

Panoramic and anamorphic non-linear scaling

–

Adaptive media display processing for 3:2 and 2:2 video content

–

Adaptive 3D noise reduction

–

Media noise reduction for MPEG inputs

–

Supports 2.2 film mode processing

●

On-chip microprocessor

–

Integrated x186-based microprocessor with rich function library

–

General Purpose Inputs/Outputs (GPIOs) available for managing system devices

(keypad, backlight, NVRAM, etc.)

–

Advanced power control for low power stand-by mode

–

2-wire serial master bus interface for external device control