www.SunLED.com

Published Date : MAR 08,2008

Drawing No : SDSA6417

V1

Checked : B.L.LIU

P.3/4

Part Number:

ZMD94W

5.6X1.4mm RIGHT ANGLE SMD CHIP LED LAMP

Remarks:

If special sorting is required (e.g. binning based on forward voltage, Luminous intensity/ luminous flux, or wavelength),

the typical accuracy of the sorting process is as follows:

1. Wavelength: +/-1nm

2. Luminous intensity/ luminous flux: +/-15%

3. Forward Voltage: +/-0.1V

Note: Accuracy may depend on the sorting parameters.

Recommended Soldering Pattern

(Units: mm ; Tolerance: ± 0.1)

Tape Specification (Units : mm)

The device has a single mounting surface. The device

must be mounted according to the specifications.