TS982

Absolute maximum ratings and operating conditions

3/20

1

Absolute maximum ratings and operating conditions

Table 1.

Absolute maximum ratings (AMR)

Symbol

Parameter

Value

Unit

1.

All voltage values are measured with respect to the ground pin.

6V

Input voltage

V

Operating free-air temperature range

-40 to + 125

°C

Storage temperature

-65 to +150

°C

Maximum junction temperature

150

°C

2.

With two sides, two-plane PCB following the EIA/JEDEC JESD51-7 standard.

45

°C/W

Thermal resistance junction to case

10

°C/W

ESD

3.

Human body model: A 100 pF capacitor is charged to the specified voltage, then discharged through a

1.5 k

Ω resistor between two pins of the device. This is done for all couples of connected pin combinations

while the other pins are floating.

2kV

4.

Charged device model: all pins and the package are charged together to the specified voltage and then

discharged directly to the ground through only one pin. This is done for all pins.

1.5

kV

5.

Machine model: A 200 pF capacitor is charged to the specified voltage, then discharged directly between

two pins of the device with no external series resistor (internal resistor < 5

Ω). This is done for all couples of

connected pin combinations while the other pins are floating.

200

V

Latch-up

Latch-up immunity (all pins)

200

mA

Lead temperature (soldering, 10sec)

250

°C

Output short-circuit duration

6.

Short-circuits can cause excessive heating. Destructive dissipation can result from a short-circuit on one or

two amplifiers simultaneously.

Table 2.

Operating conditions

Symbol

Parameter

Value

Unit

Supply voltage

2.5 to 5.5

V

Common mode input voltage range

V

Load capacitor

400

100

pF