Package information

L6210

6/8

4

Package information

is marked on the package and on the inner box label, in compliance with JEDEC Standard

JESD97. The maximum ratings related to soldering conditions are also marked on the inner

box label.

ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com.

Figure 5.

PDIP 16 mechanical data and package dimensions

OUTLINE AND

MECHANICAL DATA

(*)“D” and “E1” dimensions do not include mold flash or protusions.

Mold flash or protusions shall not exceed 0.25mm.

DIM.

mm

inch

MIN.

TYP.

MAX.

MIN.

TYP.

MAX.

A

5.330

0.2098

A1

0.380

0.0150

A2

2.920

3.300

4.950 0.1150 0.1299 0.1949

b

0.360

0.460

0.560 0.0142 0.0181 0.0220

b2

1.140

1.520

1.780 0.0449 0.0598 0.0701

c

0.200

0.250

0.360 0.0079 0.0098 0.0142

18.670 19.180 19.690 0.7350 0.7551 0.7752

E

7.620

7.870

8.260 0.3000 0.3098 0.3252

6.100

6.350

7.110 0.2402 0.2500 0.2799

e

2.540

0.1000

e1

17.780

0.7000

eA

7.620

0.3000

eB

10.920

0.4299

L

2.920

3.300

3.810 0.1150 0.1299 0.1500

PDIP 16

0015895 E

0015895_E