FVXO-PC72 datasheet(9/15 Pages) FOX

9 / 15 page

FVXO-PC72 Series

Page 9 of 15

LOT Number

The LOT Number has direct ties to the customer purchase order. The LOT Number is marked on the

“Reel” label, and also stored internally on non-volatile memory inside the XPRESSO part. XPRESSO parts

that are shipped Tape and Reel, are also placed in an Electro Static Discharge (ESD) bag and will have the

LOT Number labeled on the exterior of the ESD bag.

It is recommended that the XPRESSO parts remain in this ESD bag during storage for protection and

identification.

If the parts become separated from the label showing the LOT Number, it can be retrieved from inside one

of the parts, and the information that can be obtained is listed below:

• Customer Purchase Order Number

• Internal Fox Sales Order Number

• Dates that the XPRESSO part was shipped from the factory

• The assigned customer part number

• The specification that the part was designed for

Serial Identification

The Serial ID is the individualized information about the configuration of that particular XPRESSO part. The

Serial ID is unique for each and every XPRESSO part, and can be read by special Fox equipment.

With the Serial ID, the below information can be obtained about that individual, XPRESSO part:

• Equipment that the XPRESSO part was configured on

• Raw material used to configure the XPRESSO part

• Traceability of the raw material back to the foundries manufacturing lot

• Date and Time that the part was configured

• Any optimized electrical parameters based on customer specifications

• Electrical testing of the actual completed part

• Human resource that was monitoring the configuration of the part

Fox has equipment placed at key Fox locations World Wide to read the Lot Identification and Serial

Number of any XPRESSO part produced and can then obtain the information from above within 24 hours

Traceability – LOT Number & Serial Identification

FVXO-PC72 датащи(PDF) 9 Page - Fox Electronics