Technical Reference Notes

AEO_ALO40/35/30/20/10x48 Series

(Single Output 8

MODEL: AEO40x48 / ALO40x48 SERIES

SHEET 5 OF 30

JUNE 24, 2005 - REVISION B

Electrical Specifications (continued)

OUTPUT SPECIFICATIONS

Parameter

Device

Symbol

Min

Typical

Max

Unit

Output Enable ON/OFF

Open collector TTL compatible

Positive Enable: Mod-ON

Mod-OFF

Negative Enable: Mod-ON

Mod-OFF

All

All

All

All

-

-

-

-

2.95

-0.50

-0.50

2.95

-

-

-

-

20

1.20

1.20

20

V

V

V

V

Note:

1. Derating curves for both openframe and baseplate modules are based on derated component junction

temperatures of 120

2. Module is not internally fuesd; an external input line fuse is recommended for

use (e.g. Littlefuse

3. Refer to Figure 1 for the input ripple current test measurement setup.

4. Refer to Fig 2 for the output ripple and noise test measurement setup.

5. Output derating may apply at elevated ambient temperatures. Please refer to the appropriate derating curves.

6. Refer to the output trim equations provided (Equation 1 and 2).

SAFETY AGENCY / MATERIAL RATING / ISOLATION

Parameter

Device

Safety Approval

7

All

UL/cUL 60950, 35d Edition – Recognized

EN 60950 through TUV

Material Flammability Rating

All

UL94V-0

Parameter

Device

Symbol

Min

Typical

Max

Unit

Input to Output Capacitance

All

-

1000

-

pF

Input to output Resistance

All

-

10

-

MOhms

Input to Output Insulation Type

All

-

Basic

-

-

Note:

7. The 3.3V, 5V and 12V modules have completed required safety approvals.