Physical specification

WARNINGS

• This product should only be used with Raspberry Pi Compute Module 5, Compute Module 5 IO Board, and first-party

accessories such as the Antenna Kit and Camera Modules.

•

This product should be operated in a well-ventilated environment and should not be covered.

•

Make sure the metal case does not touch any electronic components on Compute Module 5 or any accessories, to

avoid the risk of unwanted electrical contact and shorting.

•

Ensure the screws are undamaged and can screw in securely before use. Discontinue use of the case and replace the

screws if they are damaged or deformed, or if they do not screw in securely.

•

Take care when using the case, as the metal parts of the product may become hot during operation.

SAFETY INSTRUCTIONS

To avoid malfunction or damage to this product, please observe the following:

•

Do not expose to water or moisture, or place on a conductive surface whilst in operation.

•

Do not expose to heat from any source; the Raspberry Pi IO Case is designed for reliable operation at normal ambient

temperatures.

•

Take care while handling to avoid mechanical or electrical damage to the fan and connectors.

•

Avoid touching or handling the fan while it is powered.

SSD

Power In

STATUS

Power

HDMI0

HDMI1

94

170

28

Note:

All dimensions in mm

All dimensions are approximate and for reference

purposes only. The dimensions shown should not

be used for producing production data

The dimensions are subject to part and

manufacturing tolerances

Dimensions may be subject to change

41

56

33

4 × M2.5

10

2.7

48

Note:

All dimensions in mm

All dimensions are approximate and for

reference purposes only. The dimensions

shown should not be used for producing

production data

The dimensions are subject to part and

manufacturing tolerances

Dimensions may be subject to change

Raspberry Pi IO Case for Raspberry Pi Compute Module 5 – Raspberry Pi Ltd

6