Analog door phone shall be a Bogen Model ADP1.

The door phone shall be telephone line powered

(18V DC / 20 mA minimum), answer a ring voltage of

40V AC RMS minimum, and have a ringer equivalence

number of 0.7A.

Connection shall be made via a 2-position pluggable

terminal block that is pre-wired to an RJ11 connector.

The ADP1 shall include controls for adjusting

microphone level, speaker volume, and call timer

duration.

The call timer shall be jumper defeatable.

The ADP1 shall include an auto answer feature.

The unit shall include a vandal-resistant brushed

stainless steel face plate with mounting gasket and

heavy-duty call button and a plastic cone speaker

with puncture-resistant, protective screen.

The ADP1 shall measure 5" W x 5" H x 13/4" D when

fully assembled without the bezel and 61/4" W x 61/4"

H x 13/4" D fully assembled with the bezel. It shall

weigh 4 lb. The ADP1 shall fit into most indoor and

outdoor dual gang electrical boxes with a minimum

clearance of 45/8" W x 45/8" H x 2" D.

Architect and

Engineer

Specifications

www.bogen.com

Technical

Specifications

Power:

Telephone line powered (18V DC / 20 mA minimum)

Timer Duration:

1

5 seconds to 2 minutes

Forward Disconnect:

300 ms minimum loop current loss

Ring Voltage:

40V AC RMS minimum

REN:

0.7A

Connections:

2-position pluggable terminal block

Earth Ground lug

Dimensions:

5" W x 5" H x 13/4" D (unit dimensions without bezel)

61/4" W x 61/4" H x 13/4" D (unit dimensions with bezel)

45/8" W x 45/8" H x 2" D (min. gang box opening clearance)

Product Weight:

4 lb.