3

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

GENERAL SAFETY RULES

1. ALWAYS obey all safety precautions for the handling of fuel.

2. ALWAYS make sure that you are familiar with this pump, and follow all

instructions in this manual.

3. ALWAYS make sure that the pump is positioned correctly to prevent it from

moving during operation.

4. Keep the area adjacent to the pump clear.

5. ALWAYS connect the strainer to the suction hose to stop stones and other solids

from being pulled into the pump. These can cause damage to the pump.

6. ALWAYS keep the pump dry and clear of discharge hose.

7. Only use parts supplied by the manufacturer. Using non-standard parts can be

dangerous.

8. ALWAYS use at least 300mm of flexible hose to make plumbing connections to

the pump. Rigid piping can put stress on the pump, causing damage. If you use

rigid piping, it must be supported to eliminate stress on the connections.

9. DO NOT refuel the engine while it is operating and let the engine cool sufficiently

before refuelling.

10. DO NOT use to pump petrol (or other flammable liquids), or corrosive chemicals.

The function of this pump is to pump WATER ONLY.

11. DO NOT operate this pump in an explosive atmosphere, near combustible

materials, or where there is insufficient ventilation.

12. DO NOT let children use this pump.

13. DO NOT run the pump dry. ALWAYS fill the pump with water before starting.

14. DO NOT direct the discharge flow towards another person.

15. DO NOT over-tighten drain or filler plugs. Excessive force can damage the

threads or the pump body.

16. DO NOT direct the water discharge towards electrical wiring or equipment.

WARNING: WHEN USING PUMPS, ALWAYS FOLLOW BASIC SAFETY

PRECAUTIONS TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK AND

PERSONAL INJURY. READ ALL INSTRUCTIONS BEFORE YOU

OPERATE THIS PUMP AND SAVE THEM FOR FUTURE REFERENCE.