Tel

:

+44 118 979 1238

Fax :

+44 118 979 1283

Email: info@actcrystals.com

In keeping with our ongoing policy of product evolvement and improvement, the above specification is subject to change without notice.

ISO9001: 2000 Registered

-

Registration number 6830/2

For quotations or further information please contact us at:

3 The Business Centre, Molly Millars Lane, Wokingham, Berks, RG41 2EY, UK

http://www.actcrystals.com

5-2.Electronic Characteristics

Characteristic

Min.

Typ.

Max.

Unit

Nominal Center Frequency

--

480.00

--

MHz

3dB Bandwidth

--

22

--

MHz

Usable Bandwidth

BW

--

±2

--

MHz

Insertion Loss

IL

478.00 MHz …. 482.00 MHz

--

2.5

4.0

dB

Absolute Attenuation

α

36

30

42

48

40

56

--

--

--

dB

Pass Band Ripple

Δ α

478.00 MHz …. 482.00 MHz

--

--

2.0

dB

Input / Output Impedance (Nominal)

50

Ω

1.

2.

Unless noted otherwise, all measurements are made with the filter installed in the specified test fixture that is

connected to a 50

Ω test system with VSWR≤1.2:1. The test fixture L and C are adjusted for minimum insertion

the impedance matching component values and quality.

3.

Unless noted otherwise, specifications apply over the entire specified operating temperature range.

4.

The specifications of this device are based on the test circuit shown above and subject to change or

obsolescence without notice.

5.

All equipment designs utilizing this product must be approved by the appropriate government agency prior to

manufacture or sale.

6.

Our liability is only assumed for the Surface Acoustic Wave (SAW) component(s) per se, not for applications,

processes and circuits implemented within components or assemblies.

Issue : 1 C1

Date : SEPT 04