RA4M1 datasheet(27/131 Pages) RENESAS

номер детали	RA4M1

подробное описание детали	RA4M1 Group

PDF	131 Pages

Scroll/Zoom	100%

производитель	RENESAS [Renesas Technology Corp]

домашняя страница	http://www.renesas.com

Logo

27 / 131 page

R01DS0355EJ0110 Rev.1.10

Page 27 of 131

Sep 29, 2023

RA4M1 Group

2. Electrical Characteristics

Electrical Characteristics

Unless otherwise specified, the electrical characteristics of the MCU are defined under the following conditions:

VCC*1 = AVCC0 = VCC_USB*2 = VCC_USB_LDO*2 = 1.6 to 5.5V, VREFH = VREFH0 = 1.6 to AVCC0, VBATT =

1.6 to 3.6V, VSS = AVSS0 = VREFL = VREFL0 = VSS_USB = 0V, Ta = Topr.

Note 1. The typical condition is set to VCC = 3.3V.

Note 2. When USBFS is not used.

Figure 2.1 shows the timing conditions.

Figure 2.1

Input or output timing measurement conditions

The recommended measurement conditions for the timing specification of each peripheral provided are for the best

peripheral operation. Make sure to adjust the driving abilities of each pin to meet your conditions.

Each function pin used for the same function must select the same drive ability. If the I/O drive ability of each function

pin is mixed, the AC specification of each function is not guaranteed.

For example P100

VOH = VCC × 0.7, VOL = VCC × 0.3

VIH = VCC × 0.7, VIL = VCC × 0.3

Load capacitance C = 30 pF

RA4M1 датащи(PDF) 27 Page - Renesas Technology Corp