SPEC NO: DSAH4043

REV NO: V.1

DATE: MAY/14/2007

PAGE: 2 OF 8

APPROVED: WYNEC

CHECKED: Allen Liu

DRAWN: S.J.LIU

ERP:1201002637

Handling Precautions

Compare to epoxy encapsulant that is hard and brittle, silicone is softer and flexible. Although its characteristic

significantly reduces thermal stress, it is more susceptible to damage by external mechanical force.

As a result, special handling precautions need to be observed during assembly using silicone encapsulated

LED products. Failure to comply might leads to damage and premature failure of the LED.

1. Handle the component along the side surfaces by using forceps or appropriate tools.

2. Do not directly touch or handle the silicone lens surface. It may damage the internal circuitry.

3. Do not stack together assembled PCBs containing exposed LEDs. Outside impact may scratch the silicone lens or

damage the internal circuitry.

4. During surface-mounting, the pickup capillary diameter should be larger than the silicone lens to insure the capillary

does not scratch or damage the lens.