Data sheet issued: 27 November 2023 | Issue 7

T: +44 (0)1322 527 629

E: light@lightgraphix.co.uk

www.lightgraphix.co.uk

LD42/W/A/R/AR

>

High-power C1 engine with NICHIA LED delivering up to 174lm

>

Miniature fitting with very minimal body depth and bezel diameter

>

Options include 50% glare shield (LD42W), combined 50% glare shield and 20° tilt

film (LD42A), 70% glare shield (LD42R) or combined 70% glare shield and 20° tilt film

(LD42AR)

>

Wide range of high-quality machined metal and painted bezel finishes available,

including: 316 Stainless Steel, Polished & Passivated 316 Stainless Steel, Brass,

Flamed Solid Bronze, White (RAL 9016), Black (RAL 9005), Antique Bronze, Satin

Antique Brass, Satin Brass, Anthracite Grey (RAL 7016) and any RAL

>

High efficiency optics produce excellent beam spread and shape

>

LED recessed 10mm within the body for reduced glare

>

Glass fixed with hidden gasket means no unsightly glue line

>

Hidden fixing options include spring clips or /480 first fix sleeve with O-rings

>

Switched, 0-10V, Casambi, DMX, DALI or Mains dimmable drivers available

For fixing dimensions please go to page 4.

KEY FEATURES

Dimensions in mm

DIMENSIONS

LOW GLARE MINIATURE RECESSED

INTERIOR/EXTERIOR LED WALL LIGHT

The LD42 fittings are a range of miniature recessed LED wall

lights, ideal for discreet lighting of steps and pathways in

interior, exterior and marine applications. The lens assembly

is recessed 10mm within the body for low glare, which can be

further reduced with a unique combination of glare shield and

tilt film options (W, A, R, AR), to suit individual application

requirements. This includes aperture reductions of 50% or

70%, with or without an integral 20° tilt film, which focuses

the light onto the lit surface for a concentrated lit effect. For

a miniature fitting, LD42 produces an excellent throw of light

when more output is required and with a high IP rating, is

ideal for use in the harshest of environments. When used with

our LD43 uplight, a uniform floor and wall washing effect can

be achieved.

LD42/W/A/R/AR

Ø36

Ø27

35

LD42

2.4

Cut-Out

32

36

10

27

Scaled Drawings.

Use common elemtents, such as

surfaces. But keep cables to scale.

/480 Fixing Sleeve with ‘O’ rings

LD43

LD43W

LD43A

2.4

36

27

35

27

Cut-Out

32

/SC Spring Clips

10

27

35

LD43R

LD43AR

LD42W & LD42A

LD42R & LD42AR