Time Electronics

5025 Multifunction Calibrator

www.timeelectronics.com

• 0 to 1050V AC/DC voltage

• 0 to 22A AC/DC current

• 1Ω to 1GΩ resistance

• Thermocouple simulation

• Digital frequency

• Optional oscilloscope calibration

• Optional PT100 simulation

• Capacitance and inductance option

• Power calibration option

• Clamp meter calibration (with adaptor)

• GPIB, RS232 and USB Interface

DESCRIPTION

A high performance multi-product calibrator that provides the foundation for fast and cost-effective calibration.

Designed for a wide workload the 5025 can be used to accurately test and verify both traditional and new

test equipment.

The standard unit is fitted with AC/DC voltage to 1050V, AC/DC current to 22A, digital frequency to 10MHz,

decade resistance to 1GΩ, conductance and thermocouple simulation. Further options enhance calibration

capabilities and can be added as per customer requirement.

MULTI INSTRUMENT CALIBRATION

The 5025 can calibrate various instruments and devices; digital and analogue multimeters, frequency

meters, ohm meters, AC/DC millivoltmeters, thermocouple and PT100 meters, clamp meters, timer counters,

oscilloscopes, and much more.

SIMPLE OPERATION

Functions and ranges are easily accessed from the front panel. Increase and decrease keys per digit, are

used to quickly set the output value. Deviation control then enables the user to finely adjust the output value

as a percentage (+/- 9.999%). All this information is shown on a clear, easy to read LED display.

FLEXIBLE OPTIONS

A range of options provide added functionality and features. Internal additions include capacitance and

inductance, wideband AC voltage, full range resistance (incorporating PT100 simulation), power calibration,

and oscilloscope calibration. External adaptors are available for clamp meter calibration (up to 1100A),

optical tachometer calibration, and torque wrench calibration. Also available is a power amplifier which

increases the 5025’s AC/DC voltage output drive capabilities to 100mA. This addition allows even the most

demanding analogue instruments to be tested.

CALIBRATION MADE EASY

Connect the 5025 to a PC/Laptop (via RS232, GPIB or USB)

installed with Time Electronics’ EasyCal software and automate

the calibration process. This provides increased speed of

calibration and consistency of results. Easily produce calibration

certificates and reports to ISO 9001, ISO 17025, and other

international quality standards.