© IGS Version V1

+44 (0)1635 294606 | info@i-led.co.uk | https://i-led.co.uk

Intelligent LED Solutions, Unit 2, Berkshire Business Centre,

Berkshire Drive, Thatcham, Berkshire, RG19 4EW

A division of Intelligent Group Solutions Ltd

9 of 11

THERMAL INTERFACE MATERIAL OPTIONS

Non Adhesive

Single Sided Adhesive

Double Sided Adhesive

ILA-TIM-LEDIL-0A

ILA-TIM-LEDIL-1A

ILA-TIM-LEDIL-2A

Other sizes are available, including customised parts

Click here to visit our website for our latest range

ASSEMBLY INFORMATION

» The mounting of the LEDiL Selector has to be on a metal heatsink.

» In order to optimise the thermal management, the metal surface needs to be clean (dirt and oil free) and planar for the best contact

with the LED module. A thermal grease or heat transfer material is highly recommended.

IMPORTANT INFORMATION AND PRECAUTIONS

The LEDiL Selector, when powered up, is very bright. Thus

it is advised that you do not look directly at it. Turn the

PowerStar away from you and do not shine into the eyes of

others.

LEDiL Selectors will overheat in operation if not attached

to a suitable Heatsink. Overheating can cause failure or

irreparable damage.

Do not operate LEDiL Selector with a power supply with

unlimited current. Connection to constant voltage power

supplies that are not current limited may cause the LEDiL

Selector to consume current above the specified maximum

and cause failure or irreparable damage.

LEDiL Selectors, when operated, can reach high

temperatures thus there is risk of injury if they are touched.

DO NOT HOT PLUG ON LED SIDE OF POWER SUPPLY.

DO NOT TOUCH or PUSH on the LED as this can cause

irreparable damage.