TMIK025-DIGI POT Click by MikroElektronika

DIGIPOT Click is an add-on board in the mikroBUS™ form factor. It features a single-channel, digital

potentiometer device (MCP4161) with 8-bit resolution (256 wiper steps) and the industry-standard

SPI serial interface. The resistance value of the digital potentiometer goes up to 10 kΩ. This board

features outstanding AC/DC characteristics and low-power consumption. It can be used in audio

equipment, servo-motor control, battery charging and control, LCD contrast control, programmable

filters, and more.

• Download DIGI POT Click Board Demo Code

________________________________________

TMIK026 - DAC Click by MikroElektronika

DAC Click is an add-on board in the mikroBUS™ form factor. It includes a 12-bit, Digital-to-Analog

Converter device (MCP4921) that features an optional 2x buffered output and SPI interface. The

board provides high accuracy and low-noise performance for industrial applications where

calibration or compensation of signals such as temperature, pressure, and humidity are required.

The board is set to use the 3.3V power supply by default. You may solder the PWR SEL SMD jumper

to the 5V position for use with 5V systems.

• Download DAC Click Board Demo Code

________________________________________

TMIK028 - GPS Click with Active GPS Antenna

GPS Click is an add-on board in the mikroBUS™ form factor. It’s a compact solution for adding GPS

functionality to your device. It features the LEA-6S, high-performance u-blox 6 positioning engine.

The board can interface with a microcontroller via UART or I2C, or data can be acquired using the PC

application via USB. The board features a connector that is compatible with active and passive

antennas. It can operate on 3.3V of power only.

• Download GPS Click Board Demo Code

________________________________________

TMIK029 - RELAY Click by MikroElektronika

RELAY Click is an add-on board in the mikroBUS™ form factor. The board features two G6D1AASI-

5DC power relay modules, screw terminals for connecting external loads up to 5A, 250V AC/30V DC,

and on-board transistors to drive the relays.