PicoScope® 6000E Series

PicoScope model:

6426E

6425E

6824E

6424E

6406E

6405E

6804E

6404E

6403E

6428E-D

Timebase drift

±1 ppm/year

ADC sampling

Simultaneous sampling on all active analog and digital channels

External reference clock

Input characteristics

Hi-Z, AC coupled (> 1 kΩ at 10 MHz)

Input frequency range

10 MHz ±50 ppm

Input connector

Rear-panel BNC, dedicated

Input level

200 mV to 3.3 V peak to peak

Overvoltage protection

±5 V peak max

The external reference clock synchronizes both the scope and the AWG.

Dynamic performance (typical)

Crosstalk

2500:1 (±10 mV to ±1 V ranges)

600:1 (±2 V to ±20 V ranges)

1200:1 (±10 mV to ±1 V ranges)

300:1 (±2 V to ±20 V ranges)

2500:1 (±10 mV to ±1 V ranges)

600:1 (±2 V to ±20 V ranges)

1200:1 (±10 mV to ±1 V ranges)

300:1 (±2 V to ±20 V ranges)

1000:1 up to 500 MHz

200:1 up to 3 GHz

(from DC to bandwidth of victim channel, equal voltage ranges)

Harmonic distortion

(at 1 MHz full scale)

8-bit mode

–50 dB

10/12-bit mode –60 dB

N/A

−60 dB

SFDR (at 1 MHz full scale)

> 60 dB on ±50 mV to ±20 V ranges

> 50 dB on ±50 mV to ±20 V ranges

> 60 dB on ±50 mV to

±500 mV ranges

Noise

< 150 μV RMS on most sensitive range

< 200 μV RMS on most sensitive range

< 700 μV rms,

±50 mV range

Linearity

8-bit mode

< 2 LSB

10-bit mode

< 4 LSB

N/A

< 4 LSB

Bandwidth flatness

(+0.3 dB, –3 dB) from DC to full bandwidth

(+1 dB, −3 dB) from

DC to full bandwidth

Low frequency flatness

< ±3% (or ±0.3 dB) from DC to 1 MHz

Triggering

Source

Any analog channel, AUX trigger, plus digital channels with optional TA369 MSO pods

Trigger modes

None, auto, repeat, single, rapid (segmented memory)

Advanced trigger types

(analog channels)

Edge (rising, falling, rising-or-falling), window (entering, exiting, entering-or-exiting), pulse width (positive or negative or either pulse), window pulse width (time

inside, outside window or either), level dropout (including high/low or either), window dropout (including inside, outside or either), interval, runt (positive or

negative), transition time (rise/fall), logic

Logic trigger capabilities:

AND or OR function of any number of trigger sources (analog channels, MSO ports and aux input)

NAND/NOR/XOR/XNOR of up to four trigger sources plus aux input

User-defined Boolean function of up to four trigger sources plus aux input (PicoSDK only)

Trigger sensitivity

(analog channels)

Digital triggering provides 1 LSB accuracy up to full bandwidth of scope with adjustable hysteresis

Advanced trigger types (digital

channels, with optional MSO pods)

Edge, pulse width, dropout, interval, pattern, logic (mixed signal)

Pre-trigger capture

Up to 100% of capture size