TputtyTM 607

High Performance Dispensable Gap Filler

Americas: +1.866.928.8181

Europe: +44.(0).8031.2460.0

Asia: +86.755.2714.1166

www.laird.com

THR-DS-Tputty 607 03/17/2021

Any information furnished by Laird Technologies, Inc. and its agents is believed to be accurate and reliable. All specifications are subject to change without notice.

Responsibility for the use and application of Laird Technologies materials rests with the end user. Laird Technologies makes no warranties as to the fitness,

merchantability, suitability or non- infringement of any Laird Technologies materials or products for any specific or general uses. Laird Technologies shall not be liable

for incidental or consequential damages of any kind. All Laird Technologies products are sold pursuant to the Laird Technologies’ Terms and Conditions of sale in effect

from time to time, a copy of which will be furnished upon request. © Copyright 2013 Laird Technologies, Inc. All Rights Reserved. Laird, Laird Technologies, the Laird

Technologies Logo, and other marks are trademarks or registered trademarks of Laird Technologies, Inc. or an affiliate company thereof. Other product or service

names may be the property of third parties. Nothing herein provides a license under any Laird Technologies or any third party intellectual property rights.

TYPICAL PROPERTIES

PROPERTY

TYPICAL VALUE

METHOD

Construction

Ceramic filled silicone dispensable

Color

Blue

Visual

Thermal Conductivity

6.4 W/mK

Hot Disk

Flow Rate (75cc taper tip, 0.125”

orifice, 90 psi)

60 g/min

Laird Test Method -

A16724-00

Density

3.45 g/cc

Helium Pycnometer

Flammability

V-0

UL 94

Operating Temperature Range

-40 to 200°C

Laird Test Method

Outgassing TML (weight)

0.204 %

ASTM E595

Outgassing CVCM (weight)

0.01 %

ASTM E595

Dielectric Breakdown

>6000 VAC (at 1 mm)

ASTM D149

Dielectric Constant @ 1MHz

15.0

ASTM D150

Minimum Bond line Thickness

0.150 mm (0.006”)

Laird Test Method -

A16112-00

Volume Resistivity

1013 ohm·cm

ASTM D257