3M

TM Static Shielding Bag SCC 1000

SCC 1000 Static Shielding Bag METAL-IN

PRODUCT

D

A

T

A

SHEET

STATIC SHIELDING BAG, OPEN TOP AND ZIPTOP

ITEM NUMBER

100(W”)(L”)

1100-A

98-0799-1068-7

DATASHEET

PRODUCT

Static Shielding Bag ~ Metal-In

Sizes on Page 2

This transparent, metallized static shield bag provides a static safe environment for sensi-

tive electronic devices. Four layer construction. Polyester dielectric and metal layer provide

Faraday effect shielding of ESD and fields. Tribocharging is minimized by the specially

processed polyethylene. Flat and zipper closure styles. Coded for QC traceability. These

bags are tested to meet or exceed certain electrical and physical requirements of ANSI/ESD

S541, EIA 625, and to be ANSI/ESD S20.20 program compliant.

Specifications

Electrical Properties:

Typical Values

Test Method*

Surface Resistivity / Resistance

ASTM D257

or

ANSI/ESD STM11.11

Interior

<1012 ohms/square or

<1011 ohms

Exterior

<1012 ohms/square or

<1011 ohms

Metal

100 ohms

Static Shielding

< 30 volts

EIA 541

Static Shielding

< 10 nJ

ANSI/ESD STM11.31

Static Decay

< 0.05 seconds

MIL-STD-3010 4046

Charge Generation

PTFE

0.09 nC/sq.in.

Modified Inclined Plane

Quartz

0.01 nC/sq.in.

Physical Properties:

Tensile Strength

4700 PSI

ASTM D 882

Seam Strength

> 10 lbs

ASTM D 882

Light Transmission

40 %

Tobias

Heat Sealing Conditions

Temperature

250

oF - 375o F

Time

0.5 - 3.5 seconds

Pressure

30 - 70 PSI

Thickness

3 mils

MIL-STD-3010 1003

Silicone or Amine Content

Not detected

FTIR

Open Top

ZipTop

Material Structure

SCC 1000 open top and ZipTop static shielding

bags are manufactured from industry approved

Polyester/Metal/Polyethylene laminates. The

polyester dielectric in concert with the metal

layer provide Faraday Effect shielding of an

Electrostatic Discharge (ESD). The metal layer

prevents the penetration of damaging electro-

static fields. Tribocharging is minimized by the

specially processed polyethylene.

STATIC DISSIPATIVE

COATING

POLYESTER

ALUMINUM SHIELD

STATIC

DISSIPATIVE

POLYETHYLENE

See 3M Data Sheets for these related items:

Static Warning Labels

Heat Sealer

3M is a trademark of 3M Company.

All other trademarks herein are the property

of their respective owners.

3M Electronic Solutions Division

6801 River Place Blvd

Austin, TX 78726-9000

US and Canada: 866-722-3736

Fax: 866-722-3735

Intl: 919-718-0000; Fax: 919-774-8174

email: 3Mstaticinfo@mmm.com; www.3Mstatic.com

© 3M 2011. All rights reserved.

Important Notice

All statements, technical information, and recommendations related to

3M’s products are based on information believed to be reliable, but the

accuracy or completeness is not guaranteed. Before using this prod-

uct, you must evaluate it and determine if it is suitable for your intend-

ed application. You assume all risks and liability associated with such

use. Any statements related to the product which are not contained in

3M’s current publications, or any contrary statements contained on

your purchase order shall have no force or effect unless expressly

agreed upon, in writing, by an authorized officer of 3M.

Warranty; Limited Remedy; Limited Liability.

This product will be free from defects in material and manufacture

for one year from the date of purchase. 3M MAKES NO OTHER WAR-

RANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WAR-

RANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR

PURPOSE. If this product is defective within the warranty period stat-

ed above, your exclusive remedy shall be, at 3M’s option, to replace or

repair the 3M product or refund the purchase price of the 3M product.

Except where prohibited by law, 3M will not be liable for any indi-

rect, special, incidental or consequential loss or damage arising

from this 3M product, regardless of the legal theory asserted.

*This product is not on the Qualified Product Listing under the

Defense Standardization Program.