Solid State Timers and Controllers

Tel: 973-598-9400 • Fax: 973-598-9410 • Toll Free: 800-457-4950

Artisan Controls Corporation, 111 Canfield Ave., Bldg B15-18, Randolph, NJ, 07869, USA

Notice: Artisan Controls Corporation assumes no responsibility for customers applications or product design, it is the customers responsibility to analyze their

application and test the selected product to determine its suitability for use. The information and data contained herein is the sole and exclusive property of

Artisan Controls Corporation. Any duplication, misuse, or conversion of this information without the express written consent of Artisan Controls Corporation is

illegal and will result in damages including court costs and attorney fees being assessed against the party misusing this property

V I S I T O U R W E B S I T E A T : www.artisancontrols.com

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Operating Voltage:

Voltage Tolerance:

Timing Mode:

Fixed Timing:

Tolerances On Fixed Timing:

Adjustable Timing Ranges:

Adjustable Timing Setting Accuracy:

Timing Resistor Rating:

Timing vs External Timing Resistor:

Timing Variation:

Repeatability Of Timing Period:

Recycle Time:

Output Rating:

Output Switch Characteristics:

Transient Protection:

Dielectric:

Operating Temperature:

Construction:

Agency Recognitions:

Data Sheet Revision Date:

12V AC/DC, 24V AC/DC, 48V AC/DC, 115V AC/DC, 230V AC/DC.

±20% at specified operating voltage.

Delay-On-Make, external load energizes after preset timing period.

Factory fixed at any timing period from 0.1 seconds to 10,000 seconds.

10%.

Twenty (20) ranges from five (5) models of adjustable delay-on-make timing

from 0.1 seconds to 8,000 seconds.

Minimum time - 15%, +0%. Maximum time - 0%, +15%.

Worst case power dissipation never exceeds 3 milliwatts.

See External Timing Resistance Chart.

Less than 6% of set point over full temperature and voltage range.

±1% at stabilized operating voltage temperature.

Operating voltage must be removed for a minimum of 50mS after timing

period, 200 milliseconds during timing period to assure new cycle repeats to

full time delay period.

10mA to 1A inductive with inrush current to 25A for 8 milliseconds.

4 volt drop across output switch when ON, 3mA leakage when OFF.

Protected by silicon transient suppressors responding to transients within 1

x 10-12 seconds to a peak pulse power dissipation of 1500 watts, with

transient surge currents to 200 amperes for durations up to 1/120 second

at 25°C. Maximum transient voltage protection is 6000 volts as delivered

through a source resistance of 30 ohms with a maximum duration of 8.3ms.

1500V

rms all terminals to case.

-20°C to +85°C

Encapsulated module with .25 quick connect wiring terminals.

UL File #E47858: Component - Appliance Controls, ATNZ2 (US) and ATNZ8

(Can), Component - Auxiliary Devices NKCR2 (US) and NKCR8 (Can)

October 12, 2006

Part Number

Operating Voltage

Fixed Timing In Seconds

Specify the fixed timing

period in seconds from

0.1 to 10,000

Ordering Information Fixed Timing Models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

- 12

- 24

- 48

- 115

- 230

Operates On Either

AC Or DC

Example: 438 F - 115 - 600

438, operating from 115V AC,

or DC with fixed timing of 600

seconds.

438F -

- 12

- 24

- 48

- 115

- 230

Part Number

Operating Voltage

Timing Range In Seconds

Operates On Either

AC Or DC

-1

(0.1 - 30)

-2

(1 - 300)

-3

(2 - 1000)

-4 (10 - 4500)

-5 (30 - 8000)

Example: 438 A - 24 - 2

438, operating from 24V AC,

with adjustable timing from 1

to 300 seconds.

438A -

Ordering Information Adjustable Timing Models . . . . . .