The board can be configured as the former X-NUCLEO-OUT01A1 by a set of jumpers (open: J13, J14, J15, J16,

J17) and switches (close 1-2: SW1, SW28, SW29, SW30, SW31, SW32, SW33, SW35, SW37). In this case, the

driving firmware can be only the X-CUBE-OUT1 and the board can be connected to the X-NUCLEO-PLC01A1

to form a powerful industrial PLC with 8 inputs and 16 outputs. Also, wireless communication capabilities can be

added with the X-NUCLEO-IDW01M1, which establishes communication on a smart device to manage the PLC

remotely. A dedicated ST-PLC app is available for Android™ and iOS™ systems for this purpose.

X-NUCLEO-OUT01A2

DB5030 - Rev 1

page 2/7