4 of 10
RF3827
Rev A1 DS071220
7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical
support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com.
Pin
Function
Description
Interface Schematic
1GND
Keep traces physically short. Connect this pin to the ground plane with a
via.
2NC
No connection. This pin should be connected to the ground plane.
3RF IN
RF input pin. This pin is internally DC blocked. An external DC blocking
capacitor is not required.
4NC
No connection. This pin should be connected to the ground plane.
5NC
No connection. This pin should be connected to the ground plane.
6NC
No connection. This pin should be connected to the ground plane.
7NC
No connection. This pin should be connected to the ground plane.
8NC
No connection. This pin should be connected to the ground plane.
9NC
No connection. This pin should be connected to the ground plane.
10
NC
No connection. This pin should be connected to the ground plane.
11
RF OUT
RF output and bias pin. Because DC is present on this pin, a DC blocking
capacitor, suitable for the frequency of operation, should be used in most
applications. For biasing, only an RF choke is needed.
12
NC
No connection. This pin should be connected to the ground plane.
13
NC
No connection. This pin should be connected to the ground plane.
14
NC
No connection. This pin should be connected to the ground plane.
15
NC
No connection. This pin should be connected to the ground plane.
16
NC
No connection. This pin should be connected to the ground plane.
Pkg
Base
GND
RF OUT
RF IN
Russian ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
