aerotech.com

PRO115LM ORDERING OPTIONS

Integration (Required)

Aerotech offers both standard and custom integration services to help you get your system fully

operational as quickly as possible. The following standard integration options are available for this

system. Please consult Aerotech if you are unsure what level of integration is required or if you desire

custom integration support with your system.

-TAS

Integration - Test as system

Testing, integration and documentation of a group of components as a complete system that

will be used together (ex: drive, controller and stage). This includes parameter file

generation, system tuning and documentation of the system configuration.

-TAC

Integration - Test as components

Testing and integration of individual items as discrete components. This is typically used

for spare parts, replacement parts or items that will not be used or shipped together

(ex: stage only). These components may or may not be part of a larger system.

Accessories (To Be Ordered As Separate Line Item)

ALIGN-NPA

Non-precision XY assembly

ALIGN-NPAZ

Non-precision XZ or YZ assembly

ALIGN-PA10

XY assembly; 10 arc sec orthogonality. Alignment to within 7 microns orthogonality

for short travel stages.

ALIGN-PA10Z XZ or YZ assembly with L-bracket; 10 arc second orthogonality. Alignment to

within 10 microns orthogonality for short travel stages.

ALIGN-PA5

XY assembly; 5 arc sec orthogonality. Alignment to within 3 microns orthogonality

for short travel stages.

ALIGN-PA5Z

XZ or YZ assembly with L-bracket; 5 arc second orthogonality. Alignment to within

5 microns orthogonality for short travel stages.