aerotech.com

ACS LP SERIES ORDERING INFORMATION

ACS150LP Mechanical-Bearing Direct-Drive Rotary Collet Stage

Motor (Required)

-M1

Low Current, -A Winding

Feedback (Required)

-E1

Incremental Encoder, 1 Vpp

-E2

Incremental Encoder, TTL, x5 Interpolation

-E3

Incremental Encoder, TTL, x10 Interpolation

-E4

Incremental Encoder, TTL, x25 Interpolation

-E5

Incremental Encoder, TTL, x50 Interpolation

Note: Digital output encoder signals are synthesized with a 16 MHz clock. Care must be taken to ensure that the

encoder sample rate on the controller is at least 16 MHz or higher. Slower clock rates are available on request.

Rear Seal (Optional)

-SL

Rear Seal

Wrench (Optional)

-WR

Wrench for Changing Collet

Metrology (Required)

-PL1

Metrology, Uncalibrated with Performance Plots

-PL2

Metrology, Calibrated (HALAR) with Performance Plots

Integration (Required)

Aerotech offers both standard and custom integration services to help you get your system fully

operational as quickly as possible. The following standard integration options are available for this

system. Please consult Aerotech if you are unsure what level of integration is required, or if you

desire custom integration support with your system.

-TAS

Integration - Test as system

Testing, integration, and documentation of a group of components as a complete system that

will be used together (ex: drive, controller, and stage). This includes parameter file generation,

system tuning, and documentation of the system configuration.

-TAC

Integration - Test as components

Testing and integration of individual items as discrete components that ship together. This is

typically used for spare parts, replacement parts, or items that will not be used together. These

components may or may not be part of a larger system.

Accessories (To Be Ordered As Separate Line Item)

Collet-ER25-CLTxx

ER25 DIN6499AA Electropolished Collet, 0.5 mm to 15 mm part holding

sizes available

CGF

Collet and Gripper Filtration Kit