© May 2012 Littelfuse Protection Relays & Controls

www.littelfuse.com/relayscontrols

Accessories

TerminaTions anD aDaPTers

Product

Features

accessory For

1N5339B

Termination Device

5 W axial-lead ground-check termination. Included with SE-105 and

SE-107.

SE-105

SE-107

SE-TA6-SM

Stud-Mount Termination

Assembly

50 W ground-check termination that is robust and compact for

submersible pumps. Wire lead simplifies installation.

(Replacement for 1N4553B)

SE-105

SE-107

SE-TA6

Termination Assembly

50 W ground-check termination with convenient mounting holes and

screw terminals.

SE-105

SE-107

SE-TA6A

(PGA-0T6A)

Termination Assembly

Temperature compensated 50 W ground-check termination with

convenient mounting holes and screw terminals.

SE-105

SE-107

SE-134C

SE-TA6A-WL

Termination Assembly

Temperature compensated 50 W ground-check termination with

convenient mounting holes and screw terminals.

SE-105

SE-107

SE-134C

SE-TA6ASF-WL

Small-Format Termination

Assembly with Wire Leads

Temperature compensated 12 W ground-check termination, ideal

for use in cable-coupler end caps and submersible pumps. Mounting

holes and wire leads.

SE-105

SE-107

SE-134C

SE-TA12A

Termination Assembly

Temperature compensated 50 W ground-check termination with

convenient mounting holes and screw terminals.

SE-135

SE-145

SE-TA12ASF-WL

Small-Format Termination

Assembly with Wire Leads

Temperature compensated 12 W ground-check termination, ideal

for use in cable-coupler end caps and submersible pumps. Mounting

holes and wire leads.

SE-135

SE-145

SE-TA12A-WL

Termination Assembly

Temperature compensated 50 W ground-check termination with

convenient mounting holes and screw terminals.

SE-135

SE-145

SE-TA12A

SE-TA12B

Termination Assemblies

Used together to allow an SE-134C to monitor a splitter box and two

cables.

SE-134C

PPI-600V

Parallel Path Isolator

Parallel ground-path rejection for ground-check monitors. Eliminates

intermachine arcing and prevents stray DC currents from flowing in

a monitored ground wire.

SE-105 SE-107

SE-134C SE-135

RK-13

Relay Interface Module

Separate ground-fault and ground-check indication contacts for the

SE-105, and separate ground-fault and resistor-fault contacts for the

SE-325. Used to provide output to a PLC and operate standard pilot

lights. Complete with conformally coated circuit boards.

SE-105 SE-107

SE-325

SE-485-DIN

Industrial RS-485 to RS-232

Converter

Industrial network quality RS-485 to RS-233 serial converter.

DIN-rail mounted, 24 Vdc required.

MPS

FPS

SE-485-PP

Port-Powered Serial

Converter

Converts an RS-485 signal to an RS-232 signal. Used for set-point

programming and updating flash memory. 115.2 kbit/s maximum

transfer rate.

MPU-32 MPS

FPU-32

FPS

CA-945

Serial Connector Adapter Kit

Connects an RJ45 to a 9-pin serial connector. Includes 1.5 m cable

and plug-in adapter.

MPU-32

FPU-32

SE-ICUSB232

USB to RS-232 Converter

Connects a 9-pin serial cable to a USB port.

SE-330

CA-945

SE-330AU

SE-330HV

SE-485-PP

SE-485-DIN

TerminaTions anD aDaPTers

Terminations, adapters