Description

L99VR02J is a low dropout linear voltage regulator designed for automotive applications available in

PowerSSO-12 packages. The LDO delivers up to 500 mA of load current. It consumes as low as 1 μA of

quiescent current when the regulator is disabled. The input is 40 V tolerant to withstand load dump, while the

operating input voltage range is between 2.15 V and 28 V.

The L99VR02J can be configured, through SELx pins, to generate a fixed selectable output voltage (0.8 V; 1.2 V;

1.5 V; 1.8 V; 2.5 V; 2.8 V; 3.3 V or 5 V). High output voltage accuracy (±2%) is kept over wide temperature range,

line, and load variation.

The L99VR02J features enable, reset, autonomous watchdog, advanced thermal warning, fast output discharge,

and Ishort control. The regulator output current is internally limited. The device is protected against short-circuit

and overload, besides it features over temperature protection. The short current value is configurable by an

external resistance.

The L99VR02J can operate both in post regulation, attached to a preregulated voltage or directly connected to the

battery.

L99VR02J

DS14076 - Rev 1

page 2/38