CB35000 SERIES

12/16

®

Note 1.

Referenced to Vss. Stresses above those listed under “absolute Maximum Ratings” may cause permanent damage to the

device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated

in the operation sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended peri-

ods may affect the device reliability.

Note 1.

Commercial, Industrial, and Military Conditions

Note 2.

Low Voltage TTL Circuits are NOT functional to specifications below 3.0 Volts

Note 3.

All circuits will operate to full specifications with a Vdd of 3.0V to 3.6V and a junction temperature of -40 to +125 degrees centi-

grade. These junction temperatures are compatible with the Commercial and Industrial Temperature Ranges.

Note 4.

All circuits will be functional from -55 to +150 degrees centigrade junction temperature (military Ambient Temperature Range)

but will not necessary operate to published specifications. Only circuits specified as operational to extended temperature range

may be used when operating to Military temperature conditions.

Note 1.

Commercial, and Industrial Use Only -40 +85 degrees Centigrade

Note 2.

I/O Circuits Only takes Special External Power Distribution and May NOT be mixed with GTL or CTL circuits on any one side of

the die. Only a very limited buffer set is available.

Note 3.

I/O Circuits Only takes Special External Power Distribution and May NOT be mixed with FVI or CTL circuits on any one side of

the die. Only a very limited buffer set is available.

Note 4.

I /O Circuits Only takes Special External Power Distribution and May NOT be mixed with FVI or GTL circuits on any one side of

the die. Only a very limited buffer set is available.

Table 6

Absolute Maximum Ratings (note1)

Supply Voltage, Vdd

-0.5 V to +6.0 V

Input or Output Voltage

-0.5 V to (Vdd + 0.5V)

DC Forward Bias Current, Input or Output

-24mA source, +24mA sink

Storage Temperature Ceramic

-65 to 150 degrees Centigrade

Storage Temperature Plastic

-40 to 125 degrees Centigrade

Table 7

Recommended DC Operating Conditions

Normal Operating Supply Voltage Vdd (note 1)

3.3 V +/- 10% (3.0 V to 3.6 V)

Extended Operating Supply Voltage Vdd (notes 1,2)

3.3 V + 0.3V/-0.6V (2.7V to 3.6V)

Operating Ambient Temperature

Commercial (note 3)

Industrial (note 3)

Military (note 4)

0 to 70 degrees Centigrade

-40 to +85 degrees Centigrade

-55 to +125 degrees Centigrade

Table 8

Special Voltages (Vcc) Operating Conditions

FVI (Five Volt Interface) Supply Voltage (notes 1,2)

5.0V +/- 10% (4.5 V to 5.5 V)

GTL (Gunning Transistor Logic) Supply Voltage (notes 1, 3)

1.2V +/- 5% (1.14 V to 1.26 V)

CTT (Center Tap Terminated) Supply Voltage (notes 1,4)

1.5V +/- 10% (1.35 V to 1.65 V)