| поискавой системы для электроныых деталей |
|
TS4962IQT датащи(PDF) 3 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
TS4962IQT датащи(HTML) 3 Page - STMicroelectronics |
|
3 / 44 page ![]() DocID10968 Rev 9 3/44 TS4962 Absolute maximum ratings and operating conditions 44 1 Absolute maximum ratings and operating conditions Table 1. Absolute maximum ratings Symbol Parameter Value Unit VCC Supply voltage(1) (2) 1. Caution: this device is not protected in the event of abnormal operating conditions such as short-circuiting between any one output pin and ground or between any one output pin and VCC, and between individual output pins. 2. All voltage values are measured with respect to the ground pin. 6 V Vi Input voltage (3) 3. The magnitude of the input signal must never exceed VCC + 0.3 V/GND - 0.3 V. GND to VCC V Toper Operating free air temperature range -40 to + 85 °C Tstg Storage temperature -65 to +150 °C Tj Maximum junction temperature 150 °C Rthja Thermal resistance junction to ambient DFN8 package 120 °C/W Pd Power dissipation Internally limited (4) 4. Exceeding the power derating curves during a long period will provoke abnormal operation. ESD Human body model(5) 5. Human body model: a 100 pF capacitor is charged to the specified voltage, then discharged through a 1.5 k Ω resistor between two pins of the device. This is done for all couples of connected pin combinations while the other pins are floating. 2 kV Machine model(6) 6. Machine model: a 200 pF capacitor is charged to the specified voltage, then discharged directly between two pins of the device with no external series resistor (internal resistor < 5 Ω). This is done for all couples of connected pin combinations while the other pins are floating. 200 V Charged device model(7) 7. Charged device model: all pins and the package are charged together to the specified voltage and then discharged directly to the ground through only one pin. This is done for all pins. Latch-up Latch-up immunity 200 mA VSTBY Standby pin maximum voltage (8) 8. The magnitude of the standby signal must never exceed VCC + 0.3 V/GND - 0.3 V. GND to VCC V Lead temperature (soldering, 10sec) 260 °C Table 2. Dissipation ratings Package Derating factor Power rating at 25°C Power rating at 85°C DFN8 20 mW/°C 2.5 W 1.3 W |
|
ссылки URL |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |