through APIs in basically the same way that the software libraries are imported and

programmed. PYNQ-Z2 board integrates Ethernet, HDMI Input/Output, MIC Input, Audio

Output, Arduino interface, Raspberry Pi interface, 2 Pmod, user LED, push-button and switch. It

is designed to be easily extensible with Pmod, Arduino, and peripherals, as well as general

purpose GPIO pins.

What is PYNQ? PYNQ (Python On Zynq) is an open-source project from Xilinx® that

makes it easy to design embedded systems with Xilinx Zynq® Systems on Chips

(SoCs). Using the Python language and libraries, designers can exploit the benefits of

programmable logic and microprocessors in Zynq to build more capable and exciting

embedded systems. PYNQ users can now create high performance embedded

applications with: parallel hardware execution, high frame-rate video processing,

hardware accelerated algorithms, real-time signal processing, high bandwidth IO, low

latency control. PYNQ utilizes the best advantages of ZYNQ and Python. It has been

widely used for machine learning research and prototyping. Use this board with our DF

Arduino or Raspberry Pi expansion shield, ultimate possibilities waiting for you!

SPECIFICATION



Outline Dimension: 87mm*140mm/3.43”*5.51"



ZYNQ XC7Z020-1CLG400C Board:

o

650MHz dual-core Cortex-A9 processor

o

DDR3 memory controller with 8 DMA channels and 4 High-Performance AXI3

Slave ports

o

High-bandwidth peripheral controllers: 1G Ethernet, USB 2.0, SDIO

o

Low-bandwidth peripheral controller: SPI, UART, CAN, I2C

o

Programmable from JTAG, Quad-SPI flash, and MicroSD card

o

Programmable logic equivalent to Artix-7 FPGA

o

13,300 logic slices, each with four 6-input LUTs and 8 flip-flops

o

630 KB of fast block RAM

o

4 clock management tiles, each with a phase locked loop (PLL) and mixed-mode

clock manager (MMCM)

o

220 DSP slices

o

On-chip analog-to-digital converter (XADC)



Memory: