TB-9107 Page 2 of 14

© 2021 DESCO INDUSTRIES INC

Employee Owned

SCS - 926 JR Industrial Drive, Sanford, NC 27332

East: (919) 718-0000 | West: (909) 627-9634 • Website: StaticControl.com

A. Status LEDs: The blue LED will illuminate when the

ionizer is powered and its balance and discharge times

are below the alarm thresholds. The negative red LED

will illuminate and audible alarm will sound when the

balance exceeds the negative balance alarm threshold.

The positive red LED will illuminate and audible alarm

will sound when the balance exceeds the positive

balance alarm threshold. Both the negative and positive

red LEDs will illuminate and audible alarm will sound

when the discharge time exceeds the alarm threshold.

B. Volume Pushbutton Switch: Toggles the ionizer's

settings for the audible alarm and balance alarm.

Feature

Procedure

Buzzer Volume

1. Push and release the switch

while the ionizer is powered.

2. The ionizer will toggle its

buzzer volume through 8

different settings. The 8th

setting disables the buzzer.

Balance Alarm

(CE Mode)

1. Power the ionizer OFF.

2. Push and hold the switch while

restoring power to the ionizer.

3. The buzzer will chirp once to

indicate that it is in Critical

Environment Mode.

Balance Alarm

(Standard Mode)

1. Power the ionizer OFF.

2. Push and hold the switch while

restoring power to the ionizer.

3. The buzzer will chirp twice to

indicate that it is in Standard

Mode.

C. Ethernet Port: Provides network communication

between the Ion Pro™ Benchtop Ionizer and SCS Static

Management Program (SMP).

D. Power Inlet: Connect the power cord here.

E. Fan Speed Switch: Rock the switch to the II position

to set the fan speed to HIGH. Rock the switch to the I

position to set the fan speed to LOW. Rock the switch to

the 0 position to power the ionizer OFF.

F. Power Outlet: Use the SCS 770118 power cord to

daisy-chain power to another 9 ionizers. Up to 10 Ion

Pro™ Benchtop Ionizers may be powered in one daisy

chain.

Packaging

1 Ion Pro™ Benchtop Ionizer

1 Power Cord with North America Plug (770116 only)

1 Emitter Point Cleaner

1 Certificate of Calibration

Features and Components

Figure 2. Ion Pro™ Benchtop Ionizer features and

components

A

C

F

D

B

E