-

-

DESCRIPTION

If you've got a resistive touch screen that you'd like to use, you'll need this breakout! It has a fine pitch (0.5mm)

connector soldered onto it and it's broken out into the 4 resistive wires of the panel.

A petite 0.5"x0.5" (12.5mm x 12.5mm) with two mounting holes as well, that you can use for strain relief. Works

perfectly with our 3.2" touch screen (//www.adafruit.com/product/333)

We don't have a detailed tutorial yet but we do have great example Arduino library code that shows how to get

readings, debounce, and read the pressure from any touch screen (so you can detect when its being touched and

how hard) (https://github.com/adafruit/Touch-Screen-Library) The code is not complex and is easily ported to

other microcontrollers.

MAY WE ALSO SUGGEST...

Resistive Touch Screen Controller -

(https://verify.authorize.net/anetseal/?

pid=1de2c247-f7e6-

492b-99d8-

fb648be79ff1&rurl=http%

3A//www.adafruit.com/product/334)

Online Payments

(http://www.authorize.net/)

10/23/2014

http://www.adafruit.com/product/334