Comes with:

•

A single 64x32 RGB panel

•

An IDC cable

•

A plug in power cable

Keep in mind that these displays are designed to be driven by FPGAs or other high speed

processors: they do not have built in PWM control of any kind. Instead, you're supposed to

redraw the screen over and over to 'manually' PWM the whole thing. On a 16 MHz Arduino

Mega, we managed to squeeze 12-bit color (4096 colors) with 40% CPU usage but this display

would really shine if driven by any FPGA, CPLD, Propeller, XMOS or other high speed multi-

core controller. The good news is that the display is pre-white balanced with nice uniformity so

if you turn on all the LEDs it's not a particularly tinted white.

Of course, we wouldn't leave you with a datasheet and a "good luck!" We have a full wiring

diagrams and working Arduino library code with examples from drawing pixels, lines,

rectangles, circles and text. You'll get your color blasting within the hour! On an Arduino, you'll

need 16 digital pins, and about 3200 bytes of RAM to buffer the 12-bit color image.

Please note:

•

The back of the matrix will either be green or black

•

This product may come with one or two power connections

•

There may be a short coupling data cable installed in the center

Note: Shipping weight reflects UPS' new dimensional weight regulations.

TECHNICAL DETAILS

•

Dimensions: 385mm x 190mm x 13mm / 15.2” x 7.5” x 0.5”

•

Panel weight with IDC cables and power cables: 544.31g

•

5V regulated power input, 4A max (with all LEDs on)

•

Compatible with M3 mounting screws

•

5V logic level

•

1/16 scan rate

•

Indoor display, 160 degree visibility

•

Displays are 'chainable'

Revision History:

•

As of December 2, 2020, we no longer include mounting screws or magnets.

•

CAD Drawing

•

Datasheet