The TL087, TL088, and TL287 are

obsolete and are no longer supplied.

TL087, TL088, TL287, TL288

JFET-INPUT OPERATIONAL AMPLIFIERS

SLOS082B – MARCH 1979 REVISED – JULY 2004

2

POST OFFICE BOX 655303

• DALLAS, TEXAS 75265

symbol (each amplifier)

+

−

OUT

IN +

IN −

absolute maximum ratings over operating free-air temperature range (unless otherwise noted)

TL088M

TL288M

TL087I

TL088I

TL287I

TL288I

TL087C

TL088C

TL287C

TL288C

UNIT

Supply voltage, VCC + (see Note 1)

18

18

18

V

Supply voltage, VCC − (see Note 1)

−18

−18

−18

V

Differential input voltage (see Note 2)

±30

±30

±30

V

Input voltage (see Notes 1 and 3)

±15

±15

±15

V

Input current, II (each Input)

±1

±1

±1

mA

Output current, IO (each output)

±80

±80

±80

mA

Total VCC + terminal current

160

160

160

mA

Total VCC− terminal current

− 160

− 160

− 160

mA

Duration of output short circuit (see Note 4)

Unlimited

Unlimited

Unlimited

Continuous total dissipation

See Dissipation Rating Table

Maximum junction temperature, TJ

150

150

°C

Package thermal impedance,

qJA (see Notes 5 and 6)

P package

85

85

°C/W

Lead temperature 1,6 mm (1/16 inch) from case for 60

seconds

JG or U package

300

300

300

°C

Storage temperature range, Tstg

− 65 to 150

− 65 to 150

− 65 to 150

°C

NOTES: 1. All voltage values, except differential voltages, are with respect to the midpoint between VCC+ and VCC−.

2. Differential voltages are at the noninverting input terminal with respect to the inverting input terminal.

3. The magnitude of the input voltage must never exceed the magnitude of the supply voltage or 15 V, whichever is less.

4. The output may be shorted to ground or to either supply. Temperature and/or supply voltages must be limited to ensure that the

dissipation rating is not exceeded.

5. Maximum power dissipation is a function of TJ(max), qJA, and TA. The maximum allowable power dissipation at any allowable ambient

temperature is PD = (TJ(max) – TA)/qJA. Operating at the absolute maximum TJ of 150°C can affect reliability.

6. The package thermal impedance is calculated in accordance with JESD 51-7.

7. The output may be shorted to ground or to either supply. Temperature and/or supply voltages must be limited to ensure that the

dissipation rating is not exceeded.

8. Maximum power dissipation is a function of TJ(max), qJA, and TA. The maximum allowable power dissipation at any allowable ambient

temperature is PD = (TJ(max) – TA)/qJA. Operating at the absolute maximum TJ of 150°C can affect reliability.

9. The package thermal impedance is calculated in accordance with JESD 51-7.

DISSIPATION RATING TABLE

PACKAGE

TA ≤ 25°C

POWER RATING

DERATING FACTOR

ABOVE TA = 25°C

TA = 70°C

POWER RATING

TA = 85°C

POWER RATING

TA = 125°C

POWER RATING

JG

1050 mW

8.4 mW/

°C

672 mW

546 mW

210 mW

U

675 mW

5.4 mW/

°C

432 mW

351 mW

135 mW