Technical Data Sheet

Miniature Circuit Breaker Lockout -

​ Pin Out Standard

TDS No. LOTO-

​1

Effective Date: 10/03/2017

Description:

Design

●

Safe and effective method for locking out

miniature circuit breakers

●

Require no tools to install! Easily installs with

the aid of a push button

●

Recommended to lock with lightweight Brady

Compact Safety Padlocks, and can accept up

to 9/32" shackle diameter

●

Made of a durable glass-

​filled nylon, available

as each or in packs of 6"

Material

●

Made of Glass

​-filled nylon

●

Springs made of Stainless Steel

●

Color: Outer Housing – Red (PMS 1805C)

●

Color: Inner Housing -

​ Black

●

UL rating – UL94 – HB Rating

Chemical

°C

Chemical

°C

Acetone

25

Petroleum

25

Acetone

60

Turpentine oil

25

Chlorine, chlorine water

25

Turpentine substitute (white spirit)

25

Fuel, engine: Gasoline (normal &

premium grade)

85

Trichloroethane 1,1,1

45

Temperature Range

Plastic Housings: -

​20° to 120°C (0° to 250°F)

Lubrication oil: gear oil

< 120

Lubricating oil: HD engine oils,

hydraulic oils, transformer oils

< 120

Fuel, engine: M15 mixture (15%

methanol)

70

Water (including seawater)

25

Chemical Resistance

All approved chemicals listed are based on the

manufactures specified chemical resistance chart for

plastic material only. All other materials in the device

are made of Stainless steel.

Methanol

25

Water (including seawater),

chlorinated (<0,5 mg/l)

80

Dimensions

“A”

– 1.638” [41.6mm]

“B”

– 0.950” [24.1mm]

“C”

– 0.043” [1.1mm] Max

“D”

– 0.495” [12.6mm]

“E”

– 0.281” [7.1mm]

Warranty

Note:

​All values shown are averages and should not be used for specification purposes. Test data and test results contained in this document

are for general information only and shall not be relied upon by Brady customers for designs and specifications, or be relied on as meeting

specified performance criteria. Customers desiring to develop specifications or performance criteria for specific product applications should

contact Brady for further information.

Product compliance information is based upon information provided by suppliers of the raw materials used by Brady to manufacture this product

or based on results of testing using recognized analytical methods performed by a third party, independent laboratory. As such, Brady makes no

independent representations or warranties, expressed or implied, and assumes no liability in connection with the use of this information.

Circuit Breaker Cross Reference Guide