Part Number

Power

Input Voltage

Dimensions

Weight

PT10

10A continuous

9Vdc-32Vdc (Automatic Referencing)

155 x 30 x 15mm

45g

PT10-T

10A continuous

9Vdc-32Vdc (Auto Ref) Timed

155 x 30 x 15mm

45g

PT20

20A continuous

9Vdc-32Vdc (Automatic Referencing)

155 x 30 x 15mm

45g

PT20-T

20A continuous

9Vdc-32Vdc (Auto Ref) Timed

155 x 30 x 15mm

45g

PT40

40A continuous

9Vdc-32Vdc (Automatic Referencing)

76 x 78 x 33mm

155g

PT40-T

40A continuous

9Vdc-32Vdc (Auto Ref) Timed

76 x 78 x 33mm

155g

PT60

60A continuous

9Vdc-32Vdc (Automatic Referencing)

76 x 78 x 33mm

155g

PT60-T

60A continuous

9Vdc-32Vdc (Auto Ref) Timed

76 x 78 x 33mm

155g

PT100

100A continuous

9Vdc-32Vdc (Automatic Referencing)

124 x 97 x 51mm

530g

PT100-T

100A continuous

9Vdc-32Vdc (Auto Ref) Timed

124 x 97 x 51mm

530g

PT200

200A continuous

9Vdc-32Vdc (Automatic Referencing)

124 x 97 x 51mm

530g

PT200-T

200A continuous

9Vdc-32Vdc (Auto Ref) Timed

124 x 97 x 51mm

530g

ChOOSE yOur POWErTECTOr PrODuCT

TEChNICAL DATA

Input voltage range

9-32Vdc (Automatic Referencing)

Output voltage

Equal to input voltage when operating (maximum of 100mV drop across terminals)

Transient over current rating (% of

continuous value)

110% for 10s

200% for 1s

300% for <0.5ms

On over current shutdown there is a retry every 30s

Quiescent current when shutdown

(while running)

Typ 2mA @ 13.6V, (PT40/60 Typ 4mA @ 13.6V), (PT100/200 Typ 6mA @ 13.6V)

Isolation

>400Vrms between input, output and case

Transient voltage protection

Meets ISO7637-2 International standard for 24V vehicles

Electrostatic voltage protection

Meets ISO10605, ISO14982, >8kV contact, 15kV discharge

Operating temperature

-25°C to +60°C to meet this specification table

Storage temperature

-25°C to +100°C

Ingress protection

IP65

Casework

Silver anodised aluminium, glass filled polycarbonate

Connections

PT10/20 Insulated 6.3mm push-on flat blade connectors

PT40/60 M6 ring tongues

PT100/200 M10 ring tongues

6.3mm push-in flat blade connectors for earth, switch, override and alarm

Programming lead with 2.8mm blade connector provided

Output indicator

Green LED for programming and output indication

Mounting method

PT10/20 tie wrap to wiring (supplied)

PT40/60/100/200 3off half inch No8 pozi pan head screws (supplied)

Safe area protection:

Over current

Over heat

Transients

Catastrophic protection

Limited by current sensing circuit

Limited by temperature sensing circuit

Protected by filters and rugged component selection

Set by external input fuse (set by application demands) and ground line fuse max 1A

Approvals

2004/108/EC The general EMC directive

Regulation 10.04 The automotive directive

93/68/EEC The CE marking directive

AESP5

Designed to

EN50498, ISO 7637-2

Markings

CE and E marked