General Accessories

Handle HS 1; side parts: black plastic; handle profile: natural-coloured anodised

aluminium

Model

Order no.

Colour

Note

HS 1-9005

20008073

Black, similar to RAL 9005 Side parts

HSP 1-1000

20008075

Natural-coloured anodised Handle profile, length: 1000 mm

Scope Of Delivery: Handle side parts (PA6), seals, screws

Scope of delivery HSP: profile (aluminium)

Notes: Because it swivels (fixed latching position every 30°), the handle can be used both for carrying purposes or

as a set-up bow for desktop use. Handles HS1 and HS2 consist of 2 side parts and 1 profile. In order to guarantee

customer-specific usage, side parts and profile are ordered separately. In this way, the handle lengths can be

adjusted to fit any enclosure. On request we can supply the required profile length and carry out the necessary

processing on the enclosure. The maximum load is 300 N; ingress protection max. IP 65 / DIN EN 60529,

depending on installation arrangement.

Handle HS 2; side parts: black plastic; handle profiles: natural-coloured anodised

aluminium (AE) / black anodised (SE)

Model

Order no.

Colour

Note

HS 2-9005

20008074

Black, similar to RAL 9005 Side parts

HSP 2-1000-AE

20008076

Natural-coloured anodised Handle profile, length: 1000 mm

HSP 2-1000-SE

20008077

Black anodised

Handle profile, length: 1000 mm

Scope Of Delivery: 2 side parts, screws

Scope of delivery HSP: 1m profile

Notes: Because the handle swivels (fixed detent position every 15°), it can be used as a carrying handle and also

as a tip-up bow for console use. Handles HS1 and HS2 consist of two side parts and a profile. In order to

guarantee customer-specific application, the side parts and profile can be ordered separately. This makes it

possible to adapt the length of the handles to any enclosure. On request we can supply the required profile length

and carry out the necessary processing on the enclosure. The maximum load is 150 N; protection class IP 40 / DIN

EN 60529 - depending on installation situation, higher protection class is available on request.

Universal DIN rail holder TSH 35, polyamide

Model

Order no.

Colour

TSH 35

22035000

Black, similar to RAL 9005

Scope Of Delivery: 1 DIN rail holder, screws for enclosure mounting

Notes: This DIN rail holder consists of a base and a bolt. The bolt can be snapped into the base in different

positions. This makes it ideal for use with enclosure heights between 70 mm and 160 mm. It is fitted

approximately in the middle of the enclosure, and the bolt projecting from the enclosure base can be disconnected

from the rail by means of a screwdriver in the normal way. For assembly, insert the screws (enclosed) from the

inside of the enclosure. This guarantees full insulation protection. On small enclosures, the part of the bolt which

projects upwards can be pinched off. In the case of very wide enclosures, it may be necessary to fit two DIN rail

holders.

Universal DIN rail holder TSH 35-2, polyamide

Model

Order no.

Colour

TSH 35-2

20035000

Black, similar to RAL 9005

Scope Of Delivery: 2 DIN rail holders, 4 screws for enclosure mounting

Notes: You can use this universal DIN rail holder to clip or unclip enclosures with an extremely wide range of

dimensions onto or from the DIN rail. This DIN rail holder can be screwed universally to every enclosure. It is

necessary to process the enclosure.

16

* = Available on request