STM32F071C8U6 datasheet(79/121 Pages) STMICROELECTRONICS

79 / 121 page

DocID025451 Rev 3

79/121

STM32F071CB STM32F071RB STM32F071VB STM32F071V8

Electrical characteristics

Output driving current

The GPIOs (general purpose input/outputs) can sink or source up to +/-8 mA, and sink or

source up to +/- 20 mA (with a relaxed VOL/VOH).

In the user application, the number of I/O pins which can drive current must be limited to

respect the absolute maximum rating specified in Section 6.2:

•

The sum of the currents sourced by all the I/Os on VDDIOx, plus the maximum

consumption of the MCU sourced on VDD, cannot exceed the absolute maximum rating

ΣIVDD (see Table 20: Voltage characteristics).

•

The sum of the currents sunk by all the I/Os on VSS, plus the maximum consumption of

the MCU sunk on VSS, cannot exceed the absolute maximum rating ΣIVSS (see

Table 20: Voltage characteristics).

Output voltage levels

Unless otherwise specified, the parameters given in the table below are derived from tests

performed under the ambient temperature and supply voltage conditions summarized in

Table 23: General operating conditions. All I/Os are CMOS- and TTL-compliant (FT, TTa or

TC unless otherwise specified).

Table 53. Output voltage characteristics(1)

Symbol

Parameter

Conditions

Min

Max

Unit

VOL

Output low level voltage for an I/O pin

CMOS port(2)

|IIO| = 8 mA

VDDIOx

≥ 2.7 V

-0.4

VOH

Output high level voltage for an I/O pin

VDDIOx–0.4

VOL

Output low level voltage for an I/O pin

TTL port(2)

|IIO| = 8 mA

VDDIOx

≥ 2.7 V

-0.4

VOH

Output high level voltage for an I/O pin

2.4

VOL(3)

Output low level voltage for an I/O pin

|IIO| = 20 mA

VDDIOx

≥ 2.7 V

-1.3

VOH(3)

Output high level voltage for an I/O pin

VDDIOx–1.3

VOL(3)

Output low level voltage for an I/O pin

|IIO| = 6 mA

VDDIOx

≥ 2 V

-0.4

VOH(3)

Output high level voltage for an I/O pin

VDDIOx–0.4

VOL(4)

Output low level voltage for an I/O pin

|IIO| = 4 mA

-0.4

VOH(4)

Output high level voltage for an I/O pin

VDDIOx–0.4

VOLFm+(3)

Output low level voltage for an FTf I/O pin in

Fm+ mode

|IIO| = 20 mA

VDDIOx

≥ 2.7 V

-0.4

|IIO| = 10 mA

0.4

1. The IIO current sourced or sunk by the device must always respect the absolute maximum rating specified in Table 20:

Voltage characteristics, and the sum of the currents sourced or sunk by all the I/Os (I/O ports and control pins) must always

respect the absolute maximum ratings

ΣIIO.

2. TTL and CMOS outputs are compatible with JEDEC standards JESD36 and JESD52.

3. Data based on characterization results. Not tested in production.

4. Data based on characterization results. Not tested in production.

STM32F071C8U6 датащи(PDF) 79 Page - STMicroelectronics

STM32F071C8U6 датащи(HTML) 79 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

датащи скачать

ссылки URL