Dimensions are shown in mm

Dimensions subject to change

www.ittcannon.com

Contacts

Copper alloy

Plating

Contact area : Gold alloy inlay or gold over nickel

Terminals : Tin lead (2µ min)

Moldings

High temp. thermoplastic UL 94V-0 rated

Slide lock/metal cover

Stainless steel

Number of Contacts

6 or 8

Mechanical life, hinged cover

10,000 cycles min

Mechanical life, fixed cover

50,000 cycles

Card insertion force

Hinged cover: 1 N max

Fixed cover: 3 N max

Card extraction force

Hinged cover: 1 N max

Fixed cover: 0.80 N min / 3 N max

Contact force

0.25 N min / 0.50 N max

Slide locking force

2 N min / 6 N max

Vibration

Frequency 10 to 500 Hz. Acceleration 50m/s2

Duration 6 hours - amplitude 0,35 mm

Max electrical discontinuity 1µs

Shock

Peak value 500 m/s2 – Duration 11 ms

3 shocks in each direction of each axis

Max electrical discontinuity 1 µs

Insulation resistance

1,000 M

Ω min

Resistance

100 m

Ω max

Current rating

10 µA min / 1 A max

Dielectric strength

750 Vrms min

Card detection switch

Normally open

Contact resistance

100 m

Ω max

Dielectric strength

250 Vrms min

Current rating

1 mA min / 10m A max

Maximum power

0.2 VA

Operating temperature

-40°C to +85°C

Soldering temperature

Temperature/time profile acc. to CECC00802

para. 6.1, Fig. 3 with peak temperature 250°C

Damp heat

IEC 512 test number 11c (10 days)

Salt mist

IEC 512 test number 11f (96 hours)

Quantity per reel, see table next page.

19

CCM03 MK II

A new range of CCM03 connectors

have been developed to interface with

SIM/SAM cards as defined by GSM11-

11 and ENV1375-1. The connectors are

available with either hinged covers or

fixed covers and have been designed to

minimize the amount of space needed

for PCB mounting.

Features

Hinged Cover

• Available with 6 or 8 contacts, with or

without PCB locating pegs.

• Available with insulated card presence

switch.

• The cover springs open when

unlocked while the card is in place.

• The molding is polarized so that the

cover can only be closed if the card is

correctly inserted.

• The cover can be replaced without

removing the connector from the PCB.

• Inspection slots allow an electrical test

to be made without opening the cover.

• The overall height of the connector is

only 2,5 mm. The amount of space

needed to mount the connector is just

29,65 mm x 17,2 mm.

Fixed Cover

• Available with 6 or 8 contacts.

• The overall height of the connector is

2,85 mm max. Only 25,5 mm x 17,2

mm of board space is required to

mount the connector.

General

• With tape and reel packaging as stan-

dard, the connectors are designed to

be automatically pick-and-placed.

• The high temperature thermoplastic

moldings are suited for infrared and

convection soldering processes.

• By using an inlay finish in the contact

area the life of the precious metal is

extended by over 10 times that of

standard gold plating.

• Robustly formed printed circuit tails

allow a co-planarity of ± 0,05 mm to

be maintained.

Construction

Mechanical Data

Contact Electrical Data

Switch Electrical Data

Environmental Data

Packaging