RI-60SMDM Series Molded Dry Reed Switch

RI-60SMDM Series

Ultra-miniature dry-reed switch hermetically sealed in a gas-filled glass

envelope. Single-pole, single-throw (SPST) type, having normally open

contacts, and containing two magnetically actuated reeds.

The switch is of the double-ended type and may be actuated by an

electromagnet, a permanent magnet or a combination of both.

The RI-60SMDM is available in industry standard Gull wing lead

configurations.

RI-60SMDM Series Features

▪ Contact layers: gold, sputtered ruthenium

▪ Superior glass-to-metal seal and blade alignment

▪ Excellent life expectancy and reliability

▪ Industry standard SMD package

Dimensions for RI-60SMDM Series

USA Tel: +(1)973 777 6900 / Fax: +(1) 973 777 8405

NOTES: * AT values are based on full length, measured using Philips Standard Coil (PSC).

Page 1 of 2

Group

Parameters

Test Conditions

Units

RI-60SMDM

Operating Characteristics

Operate Range

AT*

10-15

15-20

Release Range

AT*

3 (min)

4-18

Electrical Characteristics

Switched Power (max)

W

10

Switched Voltage DC (max)

V

200

Switched Voltage AC, RMS value (max)

V

140

Switched Current DC (max)

mA

500

Switched Current AC, RMS value (max)

mA

500

Carry Current DC (max)

mA

500

Breakdown Voltage (min)

V

230

Contact Resistance (initial max.)

mΩ

125

Contact Resistance (initial typ.)

mΩ

95

Contact Capacitance (max)

without test coil

pF

0.25

Insulation Resistance (min)

RH ≤ 45%

MΩ

106

Environmental Ratings

Storage Temperature

°C

-40 to +125

Operating Temperature

°C

-40 to +125

Vibration Resistance

G

10

Shock Resistance

G

100

Technical Specifications

Rev: 1 - 1 / 2019 - BR

All Dimensions in inches (mm)

are nominal unless noted otherwise.